VN808CM-32-E Octal channel high side driver Features Type RDS(on) Iout VCC VN808CM-32-E 160 m 1A 45 V CMOS compatible input Junction over-temperature protection Case over-temperature protection for thermal independence of the channels Current limitation Shorted load protection Undervoltage shut-down Protection against loss of ground Very low stand-by current Compliance to 61000-4-4 IEC test up to 4 kV Description The VN808CM-32-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. Figure 1. August 2008 PowerSO-36 It can be driven by using a 3.3 V logic supply. Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, channel turns OFF and back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is

VN808CM-E Octal channel high side driver Features Type RDS(on) Iout VCC VN808CM-E 160 m 0.7 A 45 V CMOS compatible input Junction overtemperature protection Case overtemperature protection for thermal independence of the channels Current limitation Shorted load protection Undervoltage shutdown Protection against loss of ground Very low standby current Compliance to 61000-4-4 IEC test up to 4 kV Description The VN808CM-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. September 2009 PowerSO-36 Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, channel turns OFF and back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF and w

VN808CM-E LOW THRESHOLD OCTAL HIGH SIDE DRIVER General Features Type RDS(on) Iout VCC VN808CM-E 160m 0.7A 45V PowerSO-36 CMOS COMPATIBLE INPUT JUNCTION OVER-TEMPERATURE PROTECTION CASE OVER-TEMPERATURE PROTECTION FOR THERMAL INDEPENDENCE OF THE CHANNELS CURRENT LIMITATION SHORTED LOAD PROTECTIONS UNDERVOLTAGE SHUTDOWN PROTECTION AGAINST LOSS OF GROUND VERY LOW STAND-BY CURRENT COMPLIANCE TO 61000-4-4 IEC TEST UP TO 4KV Description The VN808CM-E is a monolithic device designed with STMicroelectronics VIPower M0-3 Technology, and is intended for driving any kind of load with one side connected to ground. It can be driven by using a 3.3V logic supply. Active current limitation, combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, the channel turns OFF, then back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes the case temperature reach TCSD, the overloaded chann

VN808CM-32-E Octal channel high-side driver Datasheet - production data Description The VN808CM-32-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. PowerSO-36 Features Type RDS(on) IOUT VCC VN808CM-32-E 160 m 1A 45 V * CMOS compatible input * Junction overtemperature protection * Case overtemperature protection for thermal independence of the channels * Current limitation * Shorted load protection Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload conditions, the channel turns OFF and ON again automatically so to maintain the junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF and ON if the case temperature decreases down to TCR. Nonoverloaded channels continue to operate

VN808CM-32-E Octal channel high side driver Features Type RDS(on) Iout VCC VN808CM-32-E 160 m 1A 45 V CMOS compatible input Junction overtemperature protection Case overtemperature protection for thermal independence of the channels Current limitation Shorted load protection Undervoltage shutdown Protection against loss of ground Very low standby current Compliance to 61000-4-4 IEC test up to 4 kV Description The VN808CM-32-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. August 2009 PowerSO-36 Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, channel turns OFF and back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF an

VN808CM-32-E Octal channel high-side driver Datasheet - production data Description The VN808CM-32-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. PowerSO-36 Features Type RDS(on) IOUT VCC VN808CM-32-E 160 m 1A 45 V * CMOS compatible input * Junction overtemperature protection * Case overtemperature protection for thermal independence of the channels * Current limitation * Shorted load protection Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload conditions, the channel turns OFF and ON again automatically so to maintain the junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF and ON if the case temperature decreases down to TCR. Nonoverloaded channels continue to operate

VN808CM-E Octal channel high-side driver Datasheet - production data * Protection against loss of ground * Very low standby current * Compliance to 61000-4-4 IEC test up to 4 kV Description PowerSO-36 Features Type RDS(on) IOUT VCC VN808CM-E 160 m 0.7 A 45 V * CMOS compatible input * Junction overtemperature protection * Case overtemperature protection for thermal independence of the channels * Current limitation * Shorted load protection * Undervoltage shutdown The VN808CM-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload conditions, the channel turns OFF and ON again automatically so to maintain the junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, ove

VN808CM-32-E Octal channel high side driver Features Type RDS(on) Iout VCC VN808CM-32-E 160 m 1A 45 V CMOS compatible input Junction overtemperature protection Case overtemperature protection for thermal independence of the channels Current limitation Shorted load protection Undervoltage shutdown Protection against loss of ground Very low standby current Compliance to 61000-4-4 IEC test up to 4 kV Description The VN808CM-32-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. February 2010 PowerSO-36 Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, channel turns OFF and back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF

VN808CM-E Octal channel high-side driver Datasheet - production data * Protection against loss of ground * Very low standby current * Compliance to 61000-4-4 IEC test up to 4 kV Description PowerSO-36 Features Type RDS(on) IOUT VCC VN808CM-E 160 m 0.7 A 45 V * CMOS compatible input * Junction overtemperature protection * Case overtemperature protection for thermal independence of the channels * Current limitation * Shorted load protection * Undervoltage shutdown The VN808CM-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload conditions, the channel turns OFF and ON again automatically so to maintain the junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, ove

VN808CM-E Octal channel high-side driver Datasheet - production data * Protection against loss of ground * Very low standby current * Compliance to 61000-4-4 IEC test up to 4 kV Description PowerSO-36 Features Type RDS(on) IOUT VCC VN808CM-E 160 m 0.7 A 45 V * CMOS compatible input * Junction overtemperature protection * Case overtemperature protection for thermal independence of the channels * Current limitation * Shorted load protection * Undervoltage shutdown The VN808CM-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload conditions, the channel turns OFF and ON again automatically so to maintain the junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, ove

VN808CM-E Octal channel high side driver Features Type RDS(on) Iout VCC VN808CM-E 160 m 0.7 A 45 V CMOS compatible input Junction over-temperature protection Case over-temperature protection for thermal independence of the channels Current limitation Shorted load protection Undervoltage shutdown Protection against loss of ground Very low stand-by current Compliance to 61000-4-4 IEC test up to 4 kV Description The VN808CM-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. Figure 1. August 2008 PowerSO-36 It can be driven by using a 3.3 V logic supply. Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, channel turns OFF and back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned

VN808CM-E Octal channel high side driver Features Type RDS(on) Iout VCC VN808CM-E 150 m 1A 45 V VCC/2 compatible input Junction overtemperature protection Case overtemperature protection for thermal independence of the channels Current limitation Shorted load protection Undervoltage shutdown Protection against loss of ground Very low standby current Compliance to 61000-4-4 IEC test up to 4 kV Description The VN808CM-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side connected to ground. August 2009 PowerSO-36 Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, channel turns OFF and back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF and will restart only when case temperature has decreased

VN808CM-32-E Low threshold octal high side driver General features Type RDS(on) Iout VCC VN808CM-32-E 160m 1A 45V CMOS compatible input Junction over-temperature protection Case over-temperature protection for thermal independence of the channels Current limitation Shorted load protections Undervoltage shutdown Protection against loss of ground Very low stand-by current Compliance to 61000-4-4 IEC test up to 4kV PowerSO-36 It can be driven by using a 3.3V logic supply. Active current limitation, combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, the channel turns OFF, then back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes the case temperature reach TCSD, the overloaded channel is turned OFF and will restart only when the case temperature has decreased down to TCR (see Figures 6-7). Channels that are not overloaded continue to operate normally. Description The V

VN808CM LOW THRESHOLD OCTAL HIGH SIDE DRIVER General Features Type RDS(on) Iout VCC VN808CM 160m 0.7A 45V PowerSO-36 CMOS COMPATIBLE INPUT JUNCTION OVER-TEMPERATURE PROTECTION CASE OVER-TEMPERATURE PROTECTION FOR THERMAL INDEPENDENCE OF THE CHANNELS CURRENT LIMITATION SHORTED LOAD PROTECTIONS UNDERVOLTAGE SHUTDOWN PROTECTION AGAINST LOSS OF GROUND VERY LOW STAND-BY CURRENT COMPLIANCE TO 61000-4-4 IEC TEST UP TO 4KV Description The VN808CM is a monolithic device designed with STMicroelectronics VIPower M0-3 Technology, and is intended for driving any kind of load with one side connected to ground. It can be driven by using a 3.3V logic supply. Active current limitation, combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, the channel turns OFF, then back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes the case temperature reach TCSD, the overloaded channel is

VN808CM-32-E Octal channel high-side driver Datasheet - production data Description The VN808CM-32-E is a monolithic device designed in STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. It can be driven by using a 3.3 V logic supply. PowerSO-36 Features Type RDS(on) IOUT VCC VN808CM-32-E 160 m 1A 45 V * CMOS compatible input * Junction overtemperature protection * Case overtemperature protection for thermal independence of the channels * Current limitation * Shorted load protection Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload conditions, the channel turns OFF and ON again automatically so to maintain the junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF and ON if the case temperature decreases down to TCR. Nonoverloaded channels continue to operate