WDU9-1000 Electrical Specifications (@25C) 1. Primary Rating: 120V 60Hz 15.5W 2. Primary Excitation Current: 75mA Max 3. Secondary Rating: 9VDC 5%, 1000mADC 4. Secondary No-Load Rating: 12.7VDC Ref. 5. Output Ripple Voltage: 900mV Max 6. Operating Temperature Range: -10 Deg C to +40 Deg C 7. Temperature Rise: 75 Deg C Max at rated load 50 Deg C Max on enclosure surface Mechanical Parameters: Case Type: Thermoplastic molded enclosure. Output Cord: 24 AWG, 6 Ft. Long Min. Agency File: UL/CUL: File E245587, UL 1310 A. Dimensions: H W D 80 60 48 *Units: In Millimeter B. Schematic: Technical Note: 1. Inside (tip)-positive (+), outside-negative (-) U.S. DOE Compliance per Sec. 301 of EISA 2007: As of July 1, 2008, this product is intended for use as follows: 1. Requires Federal Food and Drug Administration listing and approval as a medical device in accordance with section 513 of the Federal Food, Drug, and Cosmetic Act (21 U.S.C. 360c) 2. Powers the charger of a detachable battery pack or charges the
VDC IDC H W D 1-9 10-24 967-8080 967-8081 967-8082 967-8083 967-8084 967-8085 967-8086 967-8087 967-8088 967-8089 967-8090 967-8091 967-8092 WDU6-100 WDU6-300 WDU6-600 WDU6-800 WDU6-1000 WDU6-1200 WDU75-100 WDU75-300 WDU75-1000 WDU9-100 WDU9-300 WDU9-500 WDU9-1000 117/120 117/120 117/120 117/120 117/120 117/120 117/120 117/120 117/120 117/120 117/120 117/120 117/120 6.0 6.0 10.0 12.0 13.0 14.0 6.0 6.0 15.0 6.0 6.0 12.0 15.0 6.0 6.0 6.0 6.0 6.0 6.0 7.5 7.5 7.5 9.0 9.0 9.0 9.0 0.10 0.30 0.60 0.80 1.00 1.20 0.10 0.30 1.00 0.10 0.30 0.50 1.00 23/16 23/16 21/2 21/2 213/16 213/16 23/16 23/16 213/16 23/16 23/16 21/2 213/16 111/16 111/16 2 2 23/ 16 23/ 16 111/16 111/16 23/ 16 111/16 111/16 2 23/ 16 17/16 17/16 15/8 15/8 17/8 17/8 17/16 17/16 17/8 17/16 17/16 15/8 17/8 5.38 5.38 6.86 6.86 9.01 9.01 6.25 5.38 9.01 5.38 5.38 6.86 9.01 5.01 5.01 6.40 6.40 8.40 8.40 5.83 5.01 8.40 5.01 5.01 6.40 8.40 967-8093 967-8094 967-8095 967-8096 967-8097 967-8098 967-8099 967-8100 967-8101 967-8102 967-8103 967-8104 N
TSQ: 3001 CMS: CMS-USM TS host OP: NN COMP: 26-07-11 Hour: 15:09 TS:TS date TS time POWER SUPPLIES Check Order Status & History Online EXTERNAL POWER SUPPLIES WALL PLUG-IN POWER SUPPLIES (CONT.) Mfg. Part No. WDU6-1200 WDU75-800 WDU9-100 WDU9-300 WDU9-500 WDU9-1000 WDU9-1200 WDU9-2300 WDU12-300 WDU12-600 WDU12-1200 WDU12-1900 WDU15-600 WDU15-1000 WDU15-1700 WDU18-200 WDU18-300 WDU18-600 WDU18-1000 WDU18-1400 WDU24-200 WDU24-300 WDU24-500 WDU24-800 WDU24-1200 Output Voltage (V) 6 7.5 9 9 9 9 9 9 12 12 12 12 15 15 15 18 18 18 18 18 24 24 24 24 24 Output Current 1.2A 800mA 100mA 300mA 500mA 1A 1.2A 2.3A 300mA 600mA 1.2A 1.9A 600mA 1A 1.7A 200mA 300mA 600mA 1A 1.4A 200mA 300mA 500mA 800mA 1.2A Input Power (W) 15 11.5 2.3 5 18.5 15.5 18.5 33 6.5 12.5 23.5 33 15 24 37 6.5 9 17 27.5 34 9 11.8 18 28.5 38 200mA 500mA 1A 1.5A 2A 2.5A 400mA 500mA 1A 2.4A 200mA 500mA 500mA 200mA 450mA 750mA 1A 1.8A 4 8.8 17 24 33 38 9 11.2 21.5 47 6 13.5 48 7.2 15 23.5 32 52.2 Price Each Dimensions (mm) H 70 70 60 60 70 80 8
WDU9-1000 Electrical Specifications (@25C) 1. Primary Rating: 120V 60Hz (15.5W @ Full Load) 2. Primary Excitation Current: 75mA Max 3. Secondary Rating: 9VDC 5%, 1000mADC 4. Secondary No-Load Rating: 12.7VDC Ref. 5. Output Ripple Voltage: 900mV Max 6. Operating Temperature Range: -10 Deg C to +40 Deg C 7. Temperature Rise: 75 Deg C Max at rated load 50 Deg C Max on enclosure surface Mechanical Parameters: Case Type: Thermoplastic molded enclosure. Output Cord: 24 AWG, 6 Ft. Long Min. Agency File: UL/CUL: File E245587, UL 1310 A. Dimensions: H W D 80 60 48 *Units: In Millimeter B. Schematic: Technical Note: 1. Inside (tip)-positive (+), outside-negative (-) DOE Compliance: Effective December 30, 2017, the DOE will now not consider an external power supply with specific characteristics to meet the definition of a device that is subject to EPCA regulation, as long as the power supply is not distributed for use with consumer products. RoHS Compliance: As of manufacturing date February 2016, all stand
WDU9-1000 Electrical Specifications (@25C) 1. Primary Rating: 120V 60Hz (15.5W @ Full Load) 2. Primary Excitation Current: 75mA Max 3. Secondary Rating: 9VDC 5%, 1000mADC 4. Secondary No-Load Rating: 12.7VDC Ref. 5. Output Ripple Voltage: 900mV Max 6. Operating Temperature Range: -10 Deg C to +40 Deg C 7. Temperature Rise: 75 Deg C Max at rated load 50 Deg C Max on enclosure surface Mechanical Parameters: Case Type: Thermoplastic molded enclosure. Output Cord: 24 AWG, 6 Ft. Long Min. Agency File: UL/CUL: File E245587, UL 1310 A. Dimensions: H W D 80 60 48 *Units: In Millimeter B. Schematic: Technical Note: 1. Inside (tip)-positive (+), outside-negative (-) DOE Compliance: Effective December 30, 2017, the DOE will now not consider an external power supply with specific characteristics to meet the definition of a device that is subject to EPCA regulation, as long as the power supply is not distributed for use with consumer products. RoHS Compliance: As of manufacturing date February 2005, all stand
gulated models with generous six foot cord lengths. Available in 60 Hz only. :: W a l l P l u g - I n s Type No. WDU6-100 WDU6-200 WDU6-300 WDU6-600 WDU6-800 WDU6-1000 WDU6-1200 WDU75-100 WDU75-200 WDU75-300 WDU75-800 WDU75-1000 WDU9-100 WDU9-300 WDU9-500 WDU9-1000 WDU9-1200 WDU9-2300 WDU12-100 WDU12-300 WDU12-600 WDU12-1200 WDU12-1900 WDU15-200 WDU15-600 WDU15-1000 WDU15-1700 WDU18-100 WDU18-200 WDU18-250 WDU18-300 WDU18-600 WDU18-1000 WDU18-1400 WDU24-200 WDU24-300 WDU24-500 WDU24-800 WDU24-1200 Input Output VAC Watts VDC IDC (A) 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 6.0 3.0 4.5 7.5 10.0 12.0 15.0 6.0 3.5 4.5 11.5 15.0 2.3 5.0 18.5 15.5 18.5 33.0 2.8 6.5 12.5 23.5 33.0 5.0 15.0 24.0 37.0 6.0 6.5 12.0 9.0 17.0 27.5 34.0 9.0 11.8 18.0 28.5 38.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.5 7.5 7.5 7.5 7.5 9.0 9.0 9.0 9.0 9.0 9.0 12.0 12.0 12.0 12.0 12.0 15.0 15.0 15.0 15.0 18.0 18.0 18.0 18.0 1
WDU9-1000 Electrical Specifications (@25C) 1. Primary Rating: 120V 60Hz 15.5W 2. Primary Excitation Current: 75mA Max 3. Secondary Rating: 9VDC 5%, 1000mADC 4. Secondary No-Load Rating: 12.7VDC Ref. 5. Output Ripple Voltage: 900mV Max 6. Operating Temperature Range: -10 Deg C to +40 Deg C 7. Temperature Rise: 75 Deg C Max at rated load 50 Deg C Max on enclosure surface Mechanical Parameters: Case Type: Thermoplastic molded enclosure. Output Cord: 24 AWG, 6 Ft. Long Min. Agency File: UL/CUL: File E245587, UL 1310 A. Dimensions: H W D 80 60 48 *Units: In Millimeter B. Schematic: Technical Note: 1. Inside (tip)-positive (+), outside-negative (-) U.S. DOE Compliance per Sec. 301 of EISA 2007: As of July 1, 2008, this product is intended for use as follows: 1. Requires Federal Food and Drug Administration listing and approval as a medical device in accordance with section 513 of the Federal Food, Drug, and Cosmetic Act (21 U.S.C. 360c) 2. Powers the charger of a detachable battery pack or charges the