mended Header Parts Manufacturer Part Number Description 3M 939836-01-36 Thru-Hole Needs to be cut to length and pin 6 removed AMP 4-102977-0 Thru-Hole, Needs to be cut to length and pin 6 removed SAMTEC TSW-107-07-L-D-006 Thru-hole, Pin 6 removed. SAMTEC TSM-107-01-L-DV-006 SMT, Pin 6 removed. Sullins PTC36DAAN Thru-Hole, Needs to be cut to length and pin 6 removed 3-4 For More Information About the IEEE 1149.1 Standard 3.3 For More Information About the IEEE 1149.1 Standard IEEE Customer Service can be reached at: Address: IEEE Customer Service 445 Hoes Lane Piscataway, NJ 08855-1331 Phone: (800) 678-IEEE in the US and Canada (732) 981-0060 outside the US and Canada FAX: (731) 981-9667 Target Design Considerations for Using the XDS560 Emulation Pod 3-5 Bus Protocol 3.4 Bus Protocol The IEEE 1149.1 standard covers the requirements for the test access port (TAP) bus slave devices and provides certain rules, summarized as follows: - The TMS/TDI inputs are sampled on the rising edge of the TCK sign
mended Header Parts Manufacturer Part Number Description 3M 939836-01-36 Thru-Hole Needs to be cut to length and pin 6 removed AMP 4-102977-0 Thru-Hole, Needs to be cut to length and pin 6 removed SAMTEC TSW-107-07-L-D-006 Thru-hole, Pin 6 removed. SAMTEC TSM-107-01-L-DV-006 SMT, Pin 6 removed. Sullins PTC36DAAN Thru-Hole, Needs to be cut to length and pin 6 removed 3-4 For More Information About the IEEE 1149.1 Standard 3.3 For More Information About the IEEE 1149.1 Standard IEEE Customer Service can be reached at: Address: IEEE Customer Service 445 Hoes Lane Piscataway, NJ 08855-1331 Phone: (800) 678-IEEE in the US and Canada (732) 981-0060 outside the US and Canada FAX: (731) 981-9667 Target Design Considerations for Using the XDS560 Emulation Pod 3-5 Bus Protocol 3.4 Bus Protocol The IEEE 1149.1 standard covers the requirements for the test access port (TAP) bus slave devices and provides certain rules, summarized as follows: - The TMS/TDI inputs are sampled on the rising edge of the TCK sign
mended Header Parts Manufacturer Part Number Description 3M 939836-01-36 Thru-Hole Needs to be cut to length and pin 6 removed AMP 4-102977-0 Thru-Hole, Needs to be cut to length and pin 6 removed SAMTEC TSW-107-07-L-D-006 Thru-hole, Pin 6 removed. SAMTEC TSM-107-01-L-DV-006 SMT, Pin 6 removed. Sullins PTC36DAAN Thru-Hole, Needs to be cut to length and pin 6 removed 3-4 For More Information About the IEEE 1149.1 Standard 3.3 For More Information About the IEEE 1149.1 Standard IEEE Customer Service can be reached at: Address: IEEE Customer Service 445 Hoes Lane Piscataway, NJ 08855-1331 Phone: (800) 678-IEEE in the US and Canada (732) 981-0060 outside the US and Canada FAX: (731) 981-9667 Target Design Considerations for Using the XDS560 Emulation Pod 3-5 Bus Protocol 3.4 Bus Protocol The IEEE 1149.1 standard covers the requirements for the test access port (TAP) bus slave devices and provides certain rules, summarized as follows: - The TMS/TDI inputs are sampled on the rising edge of the TCK sign