G5121 Global Mixed-mode Technology Inc. Fixed Frequency White LED Step-Up Converter Features General Description The G5121 is a step-up DC/DC converter specifically designed to drive up to 5 series white LEDs with constant current. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminates the need for ballast resistors. The G5121 switches at 1MHz, allowing the use of tiny external components. A low 0.254V feedback voltage minimizes power loss in the current setting resistor for high efficiency. The OVP pin monitors the output voltage and turns off the converter whenever the LEDs are open. Inherently Matched LED Current High Efficiency: 87% Drives Up to Five LEDs from 2.5V Supply 24V Internal Power Switch Fast 1MHz Switching Frequency Uses Tiny 1mm Tall Inductors Requires Only 1F Output Capacitors 19.5V Over Voltage Protection SOT-23-6 Package Applications The G5121 is available in low profile SOT-23-6 packag
G5121 Global Mixed-mode Technology Inc. Fixed Frequency White LED Step-Up Converter Features General Description Inherently Matched LED Current High Efficiency: 87% Typical Drives Up to Five LEDs from 2.5V Supply 24V Internal Power Switch Fast 850kHz Switching Frequency Uses Tiny 1mm Tall Inductors Requires Only 1F Output Capacitors 20V Over Voltage Protection SOT-23-6 Package The G5121 is a step-up DC/DC converter specifically designed to drive up to 5 series white LEDs with constant current. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminates the need for ballast resistors. The G5121 switches at 850kHz, allowing the use of tiny external components. A low 0.25V feedback voltage minimizes power loss in the current setting resistor for high efficiency. The OVP pin monitors the output voltage and turns off the converter whenever the LEDs are open. Applications The G5121 is available in low profile SOT-23
G5121 Global Mixed-mode Technology Inc. Fixed Frequency White LED Step-Up Converter Features General Description The G5121 is a step-up DC/DC converter specifically designed to drive up to 5 series white LEDs with constant current. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminates the need for ballast resistors. The G5121 switches at 1MHz, allowing the use of tiny external components. A low 0.254V feedback voltage minimizes power loss in the current setting resistor for high efficiency. The OVP pin monitors the output voltage and turns off the converter whenever the LEDs are open. Inherently Matched LED Current High Efficiency: 87% Drives Up to Five LEDs from 2.5V Supply 24V Internal Power Switch Fast 1MHz Switching Frequency Uses Tiny 1mm Tall Inductors Requires Only 1F Output Capacitors 19.5V Over Voltage Protection SOT-23-6 and TSOT-23-6 Package Applications The G5121 is available in low profile S
lutions for light control, socket outlets, electronic control devices for light like dimmers and PIR's, shutter control devices,heating control devices and much more. The representative product used for the analysis is Push-button module Comfort, 2-gang MEG5121-0300. The environmental impacts of this referenced product are representative of the impacts of the other products of the range which are developed with a similar technology. The environmental analysis was performed in conformity with ISO 14040. Constituent materials The mass of the product range is from 18 g to 50 g including packaging. It is 46.68 g for the Push button-module Comfort, 2 gang , Ref : MEG5121-0300. The constituent materials are distributed as follows: Electronic circuit > 10cm 15.34% Stainless steel 1.57% PC Polycarbonate 19.34% PE Polyethylene 2.18% PA Polyamide 0.21% PP Polypropylene 0.30% Cardboard 21.42% Paper 39.64% Substance assessment Products of this range are designed in conformity with the requiremen
G51215) Propane 85-3035-8 (G51216) Natural Gas Limited 5-Year Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts should be claimed within 30 days of purchase. For product inquiries, parts, warranty and troubleshooting support, please call 1-800-309-3452. www.cuisinartbbqs.com Manual Revision #: 27112009PD HARDWARE PACK TOOLS NEEDED FOR ASSEMBLY * #2 Phillips screwdriver (Long and short) * 1/4" Slotted screwdriver (Long and short) * Adjustable wrench * Pliers No. Description Part Number Quantity 1 1/4"-20UNCX13 Screw 20120-13013-250 8 2 1/4"-20UNCX38 Screw 20120-13038-250 4 3 1/4"-20UNCX16 Screw 20120-13016-250 8 4 o7 Lock Washer 41400-07000-250 20 5 o7 Washer 40300-07000-250 20 * Rubber Mallot 6 NO.10-24UNCx10 Screw 20124-10010-250 26 Before assembling the barbecue, read these instructions carefully. 7 o 5 Lock Washer 41400-05000-250 26 8 o 5 Washer 40300-05000-250 26 Assemble the barbecue on a flat, clean surface. Grill is h
G51213) Propane 85-3033-2 (G51214) Natural Gas Limited 5-Year Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts should be claimed within 30 days of purchase. For product inquiries, parts, warranty and troubleshooting support, please call 1-800-309-3452. www.cuisinartbbqs.com Manual Revision #: 23102009 PD HARDWARE PACK TOOLS NEEDED FOR ASSEMBLY * #2 Phillips screwdriver (Long and short) * 1/4" Slotted screwdriver (Long and short) * Adjustable wrench * Pliers H E A V Y A RTI C L E NEED S 2 T O L I F T THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES To ORDER non-warranty replacement parts or accessories, or to register your warranty, please visit us on the web at www.cuisinartbbqs.com CAUTION DANGER Sharp edges. Wear gloves when assembling your grill. Read and follow all safety statements, assembly instructions, and use and care directions before attempting to assemble and cook. 1. If you smell Gas: a. Shut off gas to th
G51219) Propane 85-3035-8 (G51220) Natural Gas LIMITED 5-YEAR WARRANTY Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts should be claimed within 30 days of purchase. For product inquiries, parts, warranty and troubleshooting support, please call 1-800-309-3452. www.cuisinartbbqs.com Manual Revision #: 11112010PD HARDWARE PACK TOOLS NEEDED FOR ASSEMBLY * #2 Phillips screwdriver (Long and short) * 1/4" Slotted screwdriver (Long and short) * Adjustable wrench * Pliers No. Description Part Number Quantity 1 1/4"-20UNCX13 Screw 20120-13013-250 8 2 1/4"-20UNCX38 Screw 20120-13038-250 4 3 1/4"-20UNCX16 Screw 20120-13016-250 8 4 o7 Lock Washer 41400-07000-250 20 5 o7 Washer 40300-07000-250 20 * Rubber Mallot 6 NO.10-24UNCx10 Screw 20124-10010-250 26 Before assembling the barbecue, read these instructions carefully. 7 o 5 Lock Washer 41400-05000-250 26 8 o 5 Washer 40300-05000-250 26 Assemble the barbecue on a flat, clean surface. Grill is heavy. 9 ST4.2
MMARY Number of Pads Metal Wiring 753,768 496 3LM CG51654 647,948 456 3LM CG51484 477,632 400 3LM Clock net for optimized on-chip clock skew control CG51364 363,084 352 3LM Advanced packaging options include QFP, PGA, BGA, and MCM CG51284 277,380 304 3LM CG51214 214,760 272 3LM High drive capability: 2, 4, 8, 12, or 24mA CG51164 160,140 240 3LM Supports all major third party EDA tools including: Cadence, Mentor, Synopsys CG51114 113,520 208 3LM CG51343 34,272 120 3LM Supports 3.3V and 5.0V I/O RAM compiler supports Single/Dual/Triple port RAM Supports JTAG boundary scan, full and partial scan Phase Locked Loop for interchip clock skew control Copyright 1994 by FUJITSU LIMITED Device Name Available Gates CG51754 CG51/CE51 SERIES DC CHARACTERISTICS Measuring conditions: VDD = 3.3V + 0.3V,VSS = 0V, Tj = -0 to 100C Parameter Supply current2 High-level High level input voltage3 Low-level Low level input voltage3 Symbol IDDS VIH VIL Test Conditions Standby mode1 CG51343 to CG51214 -1.0 - 1
tic (ASA) front (optics) PMMA ambient conditions operating temperature -25...+65C order reference sensing distance Tw connection types protection class FHDK 10G5120 30mm 2mm cable 4 pin, 2 m IP 65 FHDK 10G5120/S35A 30mm 2mm connector M8 4 pin IP 67 FHDK 10G5121 50mm 3mm cable 4 pin, 2 m IP 65 FHDK 10G5121/S35A 50mm 3mm connector M8 4 pin IP 67 FHDK 10G5122 80mm 8mm cable 4 pin, 2 m IP 65 FHDK 10G5122/S35A 80mm 8mm connector M8 4 pin IP 67 1 www.baumer.com 16/10/2011
tic (ASA) front (optics) PMMA ambient conditions operating temperature -25...+65C order reference sensing distance Tw connection types protection class FHDK 10G5120 30mm 2mm cable 4 pin, 2 m IP 65 FHDK 10G5120/S35A 30mm 2mm connector M8 4 pin IP 67 FHDK 10G5121 50mm 3mm cable 4 pin, 2 m IP 65 FHDK 10G5121/S35A 50mm 3mm connector M8 4 pin IP 67 FHDK 10G5122 80mm 8mm cable 4 pin, 2 m IP 65 FHDK 10G5122/S35A 80mm 8mm connector M8 4 pin IP 67 1 www.baumerelectric.com 10/1/2009
YES YES AT5163:Voutmax=40V,1MHz inte YES AME5144:Voutmax=36V,1MHz internally fixed frequency,Iswmax=0.7A,Feedback 0.2V,Iq=500uA,DFN-8; YES AME5140:Voutmax=30V,1.2MHz internally fixed frequency,Iswmax=1.8A,Feedback 1.23V,Iq=400uA; G5111:Voutmax=28V,2MHz in G5121 AME5142/A YES YES AME5142/A:Voutmax=25V,1.2MHz internally fixed frequency,Iswmax=0.85A,Feedback 0.15V/0.104V,Iq=180uA; G5125 AME5140 YES YES AME5140:Voutmax=30V,1.2MHz internally fixed frequency,Iswmax=1.8A,Feedback 1.23V,Iq=400uA; YES AME5142/A:Voutmax=25V,1.2MHz internally fixed frequency,Iswmax=0.85A,Feedback 0.15V/0.104V,Iq=180uA; YES AME5144:Voutmax=36V,1MHz internally fixed frequency,Iswmax=0.7A,Feedback 0.3V,Iq=500uA; G5126 G5127/A 2 of 19 AME5142/A YES AME5142/A AME5144 YES YES G5121:Voutmax=20V,1MHz internally fixed frequency,Iswm G5125:Voutmax=33V,1MHz internally fixed frequency,Iswmax=0.85A, G5126:Voutmax=28V,1MHz internally fixed frequency,Iswm G5128 G5129 G5130/1 YES AME5142/A AME5140 G5132 AME5140 G5135 AME5140 Y
ial scan . . CG51484 477,632 400 3LM e Phase Locked Loop for interchip clock skew control _ : CG51364 363,084 352 3LM Clock net for optimized on-chip clock skew control CG51284 277,380 304 3LM e Advanced packaging options include QFP, PGA, BGA, , and MCM CG51214 214,760 272 3LM e High drive capability: 2, 4, 8, 12, or 24mA CG51164 160,140 240 3LM Supports all major third party EDA tools including: CG51114 113,520 208 3LM Cadence, Mentor, Synopsys CG51343 34,272 120 3LM Copyright 1994 by FUJITSU LIMITEDCG51/CE51 SERIES DC CHARACTERISTICS Measuring conditions: Vpp = 3.3V + 0.3V,Vsg = OV, Tj = 0 to 100C a Requirements | Parameter Symbol Test Conditions 7 Unit Min. Typ. Max. CG51343 to CG51214 1.0 - 1.0 Supply current? Ipps Standby mode! Cee taed to -2.0 - 2.0 mA CG51654 to CG51754 3.0 - 3.0 CMOS Normal cell Vpp X 0.7 - Vpp High-level ah el input voltage Vin level Schmitt trigger cell Vpp X 0.8 - Vpp V TTL level Normal cell 2.2 - Vpp CMOS Normal cell Vss - Vpp X 0.2 Low-level ah el input
A) front (optics) PMMA ambient conditions operating temperature -25 ... +65 C order reference sensing distance Tw connection types protection class FHDK 10G5120 30 mm 2 mm cable 4 pin, 2 m IP 65 FHDK 10G5120/S35A 30 mm 2 mm connector M8 4 pin IP 67 FHDK 10G5121 50 mm 3 mm cable 4 pin, 2 m IP 65 FHDK 10G5121/S35A 50 mm 3 mm connector M8 4 pin IP 67 FHDK 10G5122 80 mm 8 mm cable 4 pin, 2 m IP 65 FHDK 10G5122/S35A 80 mm 8 mm connector M8 4 pin IP 67 1 www.baumer.com 17/7/2009
tic (ASA) front (optics) PMMA ambient conditions operating temperature -25...+65C order reference sensing distance Tw connection types protection class FHDK 10G5120 30mm 2mm cable 4 pin, 2 m IP 65 FHDK 10G5120/S35A 30mm 2mm connector M8 4 pin IP 67 FHDK 10G5121 50mm 3mm cable 4 pin, 2 m IP 65 FHDK 10G5121/S35A 50mm 3mm connector M8 4 pin IP 67 FHDK 10G5122 80mm 8mm cable 4 pin, 2 m IP 65 FHDK 10G5122/S35A 80mm 8mm connector M8 4 pin IP 67 1 www.baumerelectric.com 16/11/2008
plastic (ASA) front (optics) PMMA ambient conditions operating temperature -25...+65C order reference sensing distance Tw connection types protection class FHDK 10G5120 30mm 2mm cable 4 pin IP 65 FHDK 10G5120/S35A 30mm 2mm connector M8, 4 pin IP 67 FHDK 10G5121 50mm 3mm cable 4 pin IP 65 FHDK 10G5121/S35A 50mm 3mm connector M8, 4 pin IP 67 FHDK 10G5122 80mm 8mm cable 4 pin IP 65 FHDK 10G5122/S35A 80mm 8mm connector M8, 4 pin IP 67 www.baumerelectric.com 28/12/2007