| Product type designation | RF690L transponder |
| SIMATIC RF690L SmartLabel PET; 88x 25x 1.6 mm; on-metal label, heat-resistant ISO 18000-6C, EPC Class 1 GEN 2, frequency 860 to 868 MHz (ETSI), Chip Type Alien Higgs 3, EPC 96 bit expandable up to 480 bits 64/16-byte add-on memory 400 units on one roll Minimum order quantity 400 units |
| Wireless frequencies |
| Operating frequency | 865 ... 868 MHz |
| Range / maximum | 5 m; observe system manual RF600: overrange is possible, range is reader dependent: observe http://support.automation.siemens.com/WW/view/en/67384964 |
| Protocol / with radio transmission | EPCglobal Class 1 Gen 2 / ISO 18000-6C |
| Transfer rate / with radio transmission / maximum | 320 kbit/s |
| Product feature / multitag-capable | Yes |
| Polarization | Linear |
| Electrical data |
| Product component / Backup battery | No |
| Memory |
| Type of memory | EEPROM |
| Storage capacity / of the user memory | 64 byte |
| Type of memory organization | EPC memory 96/480 bits, user memory 64/16 bytes (512/128 bits), TID memory 12 bytes |
| Number of read cycles / at ambient temperature < 40 °C / maximum | 100000000000000 |
| Number of write cycles / at ambient temperature < 40 °C / maximum | 500 |
| Data retention time / at ambient temperature < 40 °C / not less than | 50 y |
| Property of memory | lock, unlock, kill, write protection, password protection |
| Type of transponder chip used | Alien Higgs 3 |
| Mechanical data |
| Material | Top side: PET |
| Color | beige / silver |
| Mounting distance / relating to metal surfaces / recommended / minimum | 0 mm |
| Permitted ambient conditions |
| Ambient temperature | |
| during read/write access | -25 ... +85 °C |
| outside the read/write area | -25 ... +160 °C |
| during storage | 13 ... 23 °C |
| Ambient condition / for operation | Operating temperature permanent up to +95 °C, 3 cycles at 30 minutes each or once 90 minutes up to 160 °C |
| Protection class IP | IP67 |
| Resistance to mechanical stress | Torsion and bending stress conditionally permissible |
| Design, dimensions and weight |
| Width | 88 mm |
| Height | 1.6 mm |
| Depth | 25 mm |
| Net weight | 5 g |
| Mounting type | one-side adhesible |
| Product properties, functions, components / general |
| Product feature | |
| silicon-free | Yes |
| printable | Yes |
| Printing process | Thermal transfer process |
