| Product type designation | RF630L transponder |
| SIMATIC RF630L (special version) SmartLabel PET; 90x 30 mm; strongly adhesive on plastic ISO 18000-6C, EPC Class 1 GEN 2 frequency 860 to 960 MHz, Chip Type NXP G2IL, 128 bit EPC Memory without add-on memory Core diameter 76 mm 3500 units on one roll Minimum order quantity 7000 units |
| Wireless frequencies |
| Operating frequency | 860 ... 960 MHz |
| Range / maximum | 4 m; observe system manual RF600: overrange is possible, range is reader dependent: observe http://support.automation.siemens.com/WW/view/en/67384964 |
| Protocol / with radio transmission | EPCglobal Class 1 Gen 2 / ISO 18000-6C |
| Transfer rate / with radio transmission / maximum | 320 kbit/s |
| Product feature / multitag-capable | Yes |
| Polarization | Linear |
| Electrical data |
| Product component / Backup battery | No |
| Memory |
| Type of memory | EEPROM |
| Storage capacity / of the user memory | 16 byte |
| Type of memory organization | EPC memory 128 bits, TID memory 8 bytes |
| Number of read cycles / at ambient temperature < 40 °C / maximum | 100000000000000 |
| Number of write cycles / at ambient temperature < 40 °C / maximum | 100000 |
| Data retention time / at ambient temperature < 40 °C / not less than | 30 y |
| Property of memory | lock, unlock, kill, write protection, password protection |
| Type of transponder chip used | NXP G2iL |
| Mechanical data |
| Material | PET |
| Color | white |
| Mounting distance / relating to metal surfaces / recommended / minimum | 3 mm |
| Permitted ambient conditions |
| Ambient temperature | |
| during read/write access | -25 ... +85 °C |
| outside the read/write area | -40 ... +160 °C |
| during storage | 5 ... 25 °C |
| Ambient condition / for operation | Maximum storage life 2 years at 45 to 55 % humidity, operating temperature permanent up to 85 °C, short term -40 °C to 160 °C for 90 minutes |
| Protection class IP | IP67, when adhered |
| Resistance to mechanical stress | Torsion and bending stress conditionally permissible |
| Design, dimensions and weight |
| Width | 30 mm |
| Height | 0.3 mm |
| Depth | 90 mm |
| Net weight | 1 g |
| Mounting type | one-side adhesible |
| Product properties, functions, components / general |
| Product feature | |
| printable | Yes |
| Printing process | Thermal transfer process |
