6GK1562-2AA00
COMMUNICATION PROCESSOR CP 5622

From SIEMENS

Product type designationCP 5622
Communications processor CP 5622 PCI Express X1 card for Connection of a PG or PC with PCI Express bus to PROFIBUS or MPI can be used under 32 bit and 64 bit For operating systems also refer to Entry ID 22611503
Transmission rate
Transfer rate
at the 1st interface / acc. to PROFIBUS9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of electrical connections
at the 1st interface / acc. to PROFIBUS1
Type of electrical connection
at the 1st interface / acc. to PROFIBUS9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage / of the supply voltageDC
Supply voltage
1 / from backplane bus3.3 V
2 / from backplane bus12 V
Relative symmetrical tolerance / at DC
at 3.3 V9 %
at 12 V8 %
Consumed current
1 / from backplane bus / at DC / maximum0.3 A
2 / from backplane bus / at DC / maximum0.25 A
Power loss [W]4 W
Permitted ambient conditions
Ambient temperature
during operation5 ... 55 °C
during storage-20 ... +60 °C
during transport-20 ... +60 °C
Relative humidity / at 25 °C / without condensation / during operation / maximum85 %
Protection class IPIP00
Design, dimensions and weight
Module formatPCI Express x1
Width18 mm
Height107 mm
Depth101 mm
Net weight87 g
Number of plug-in cards of same design / plug-in / per PC station1
Number of units / Note-
Performance data
Performance data / open communication
Software / for open communication / by means of SEND/RECEIVE / requiredYes, SOFTNET-PB DP / SOFTNET-PB DP Slave / SOFTNET-PB S7
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum50
Performance data / PROFIBUS DP
Software / for DP master function / requiredYes, SOFTNET-PB DP
Service / as DP master
DPV0Yes
DPV1Yes
DPV2No
Number of DP slaves / on DP master / usable64
Amount of data
of the address area of the inputs / as DP master / total14640 byte
of the address area of the outputs / as DP master / total14640 byte
of the address area of the inputs / per DP slave244 byte
of the address area of the outputs / per DP slave244 byte
of the address area of the diagnostic data / per DP slave244 byte
Software / for DP slave function / requiredYes, SOFTNET-PB DP slave
Service / as DP slave
DPV0Yes
DPV1No
Amount of data
of the address area of the inputs / as DP slave / total122 byte
of the address area of the outputs / as DP slave / total122 byte
Performance data / S7 communication
Software / for S7 communication / requiredYes, SOFTNET-PB S7
Number of possible connections / for S7/PG communication / maximum8
Performance data / multi-protocol mode
Number of configurable connections / per PC station207
Product functions / management, configuration
Configuration software / requiredIncluded in the scope of delivery of the required software product
Product functions / Diagnosis
Product function
Port diagnosticsYes
Standards, specifications, approvals
Standard
for EMC2004/108/EC
for safety / from CSA and ULCAN/CSA C22.2 & UL 60950-1, UL 508
for emitted interferenceEN 61000-6-3, EN 61000-6-4
for interference immunityEN 61000-6-1, EN 61000-6-2
Certificate of suitability
CE markingYes
C-TickYes
Accessories
accessoriesoptional: MPI cable

External links