| Product type designation | CP 1604 |
| Communications processor CP 1604 PC/104 plus card (32 bit; 33/66M Hz; 3.3/5 V) with ASIC ERTEC 400 for connection to PROFINET IO with 4-port real-time switch via Development kit DK-16XX PN IO; NCM PC |
| Transmission rate |
| Transfer rate | 100 Mbit/s |
| Interfaces |
| Number of electrical connections | |
| at the 1st interface / acc. to Industrial Ethernet | 4 |
| for power supply | 1 |
| Type of electrical connection | |
| at the 1st interface / acc. to Industrial Ethernet | RJ45 port via connection board |
| for power supply | 4-pole terminal block through power supply board |
| Supply voltage, current consumption, power loss |
| Type of voltage / of the supply voltage | DC |
| Type of voltage supply / optional external supply | Yes |
| Supply voltage | |
| 1 / from backplane bus | 5 V |
| external | 5 V |
| Note | optional external power supply and external supply voltage alternatively via power supply board (optional accessory) |
| Relative symmetrical tolerance / at DC | |
| at 5 V | 5 % |
| Consumed current | |
| 1 / from backplane bus / at DC / maximum | 0.8 A |
| from external supply voltage / at DC / at 24 V / maximum | 0.3 A |
| Power loss [W] | 4 W |
| Power loss [W] / in switch mode / maximum | 4.1 W |
| Permitted ambient conditions |
| Ambient temperature | |
| during operation | 5 ... 60 °C |
| during storage | -20 ... +60 °C |
| during transport | -20 ... +60 °C |
| Relative humidity / at 25 °C / without condensation / during operation / maximum | 95 % |
| Protection class IP | IP00 |
| Design, dimensions and weight |
| Module format | PC/104-Plus |
| Width | 90 mm |
| Height | 24 mm |
| Depth | 95 mm |
| Net weight | 110 g |
| Mounting type | Screw mounting |
| Number of plug-in cards of same design / plug-in / per PC station | 1 |
| Number of units / Note | - |
| Performance data |
| Performance data / PROFINET communication / as PN IO-Controller |
| Software / for PROFINET IO communication / required | No |
| Number of PN IO devices / on PROFINET IO controller / usable / total | 128 |
| Number of PN IO IRT devices / on PROFINET IO controller / usable | 64 |
| Amount of data | |
| as user data for input variables / as PROFINET IO controller / maximum | 8192 byte |
| as user data for input variables / as PROFINET IO controller / maximum | 8192 byte |
| as user data for input variables per PN IO device / as PROFINET IO controller / maximum | 1430 byte |
| as user data for output variables per PN IO device / as PROFINET IO controller / maximum | 1430 byte |
| Performance data / PROFINET communication / as PN IO-Device |
| Amount of data | |
| as user data for input variables / as PROFINET IO device / maximum | 1430 byte |
| as user data for input variables / as PROFINET IO device / maximum | 1430 byte |
| as user data for input variables / for each sub-module as PROFINET IO device | 254 byte |
| as user data for input variables / for each sub-module as PROFINET IO device | 254 byte |
| as user data for the consistency area for each sub-module | 254 byte |
| Number of submodules / per PROFINET IO-Device | 64 |
| Product functions / management, configuration |
| Product function / MIB support | Yes |
| Protocol / is supported | |
| SNMP v1 | Yes |
| DCP | Yes |
| LLDP | Yes |
| Configuration software / required | Included in scope of supply |
| Identification & maintenance function | |
| I&M0 - device-specific information | Yes |
| I&M1 – higher-level designation/location designation | Yes |
| I&M2 - installation date | Yes |
| I&M3 - comment | Yes |
| I&M4 - signature | Yes |
| I&M4 - OEM data | Yes |
| Product functions / Diagnosis |
| Product function | |
| Web-based diagnostics | Yes |
| Port diagnostics | Yes |
| Product functions / switch |
| Product feature / Switch | Yes |
| Product function / switch-managed | No |
| Product function / with IRT / PROFINET IO switch | Yes |
| Product functions / Redundancy |
| Software / for redundancy function / required | No |
| Product function | |
| Ring redundancy | Yes |
| Redundancy manager | Yes |
| Protocol / is supported / Media Redundancy Protocol (MRP) | Yes |
| Standards, specifications, approvals |
| Standard | |
| for EMC | 2004/108/EC |
| for safety / from CSA and UL | CAN/CSA C22.2 & UL 60950-1 |
| for emitted interference | EN 61000-6-3, EN 61000-6-4 |
| for interference immunity | EN 61000-6-1, EN 61000-6-2 |
| Certificate of suitability | |
| CE marking | Yes |
| C-Tick | Yes |
| Accessories |
| accessories | optional: Connection board for CP 1604, power supply board for CP 1604, HARDNET-IE DK (development kit) |
