6ES7151-3AA23-0AB0
ET200S, IM151-3 PN ST Interfacemodule

From SIEMENS

SIMATIC DP, Interface module IM 151-3 PN ST for ET 200S Transmission rate 100 Mbit/s max. 63 power, electronic or motor starter modules up to 2 m width can be connected; 2x bus connections via RJ45 incl. termination module
General information
Product type designationIM 151-3 PN ST
Configuration control
via datasetYes
Supply voltage
Mains buffering
Mains/voltage failure stored energy time20 ms
Input current
from supply voltage 1L+, max.200 mA
Power loss
Power loss, typ.3.3 W
Address area
Addressing volume
Inputs256 byte
Outputs256 byte
Interfaces
Number of PROFINET interfaces1
Supports protocol for PROFINET IO
AutocrossingYes
automatic detection of transmission rateYes
Transmission rate, max.100 Mbit/s
Number of RJ45 ports2
Protocols
Supports protocol for PROFINET IOYes
Protocols (Ethernet)
TCP/IPNo
SNMPYes
LLDPYes
pingYes
ARPYes
PROFINET IO Device
Services
— Isochronous modeNo
— IRTYes
— Prioritized startupYes
— Shared deviceYes
— Number of IO Controllers with shared device, max.2
Redundancy mode
MRPYes
Interrupts/diagnostics/status information
Diagnostics indication LED
Bus fault BF (red)Yes
Group error SF (red)Yes
Monitoring 24 V voltage supply ON (green)Yes
Connection to network LINK (green)Yes
Potential separation
between backplane bus and electronicsNo
between supply voltage and electronicsNo
between Ethernet and electronicsYes
Permissible potential difference
between different circuits75 V DC/60 V AC
Isolation
Isolation tested with500 V
Standards, approvals, certificates
CE markYes
UL approvalYes
Ambient conditions
Ambient temperature during operation
min.0 °C
max.60 °C
Dimensions
Width60 mm
Height119.5 mm
Depth75 mm
Weights
Weight, approx.150 g
last modified:03/13/2019

External links