6ES7151-3AA10-0AB0 ET200S, INTERFACE MODULE IM151-3 PN
From SIEMENS
| ***Spare part*** SIMATIC DP, Interface module IM 151-3 PROFINET for ET 200S, Transmission rate 100 Mbit/s max. 63 power, electronic or motor starter modules up to 2 m width can be connected, Bus connection via RJ45 incl. termination module | ||
| General information | ||
| Vendor identification (VendorID) | 02AH | |
| Device identifier (DeviceID) | 301H | |
| Supply voltage | ||
| Mains buffering | ||
| Mains/voltage failure stored energy time | 20 ms | |
| Input current | ||
| from supply voltage 1L+, max. | 250 mA | |
| Power loss | ||
| Power loss, typ. | 2.5 W | |
| Address area | ||
| Addressing volume | ||
| Inputs | 256 byte | |
| Outputs | 256 byte | |
| Interfaces | ||
| Supports protocol for PROFINET IO | ||
| automatic detection of transmission rate | Yes | |
| Transmission rate, max. | 100 Mbit/s | |
| Number of RJ45 ports | 2 | |
| Protocols | ||
| Supports protocol for PROFINET IO | Yes | |
| Isochronous mode | ||
| Isochronous operation (application synchronized up to terminal) | No | |
| Interrupts/diagnostics/status information | ||
| Alarms | Yes | |
| Diagnostics function | Yes | |
| Diagnostics indication LED | ||
| Bus fault BF (red) | Yes | |
| Group error SF (red) | Yes | |
| Monitoring 24 V voltage supply ON (green) | Yes | |
| Connection to network LINK (green) | Yes | |
| Transmit/receive RX/TX (yellow) | Yes | |
| Potential separation | ||
| between backplane bus and electronics | No | |
| between supply voltage and electronics | No | |
| between Ethernet and electronics | Yes | |
| Dimensions | ||
| Width | 45 mm | |
| Height | 119.5 mm | |
| Depth | 75 mm | |
| Weights | ||
| Weight, approx. | 135 g | |
| last modified: | 03/13/2019 | |
