6ES7151-3AA00-0AB0 ET200S, INTERFACE MODULE IM151-3 PN
From SIEMENS
| *** SPARE PART*** SIMATIC DP, INTERFACE MODULE IM151-3 PROFINET FOR ET200S; TRANSMISS. RATE UP TO 100MBIT/S MAX. OF 63 POWER, ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA RJ45 INCL. TERMINATING MODULE | ||
| General information | ||
| Vendor identification (VendorID) | 002AH | |
| Device identifier (DeviceID) | 0301H | |
| Supply voltage | ||
| Mains buffering | ||
| Mains/voltage failure stored energy time | 20 ms | |
| Input current | ||
| from supply voltage 1L+, max. | 200 mA | |
| Power loss | ||
| Power loss, typ. | 2 W | |
| Address area | ||
| Addressing volume | ||
| Inputs | 256 byte | |
| Outputs | 256 byte | |
| Interfaces | ||
| Transmission procedure | 100BASE-TX | |
| Supports protocol for PROFINET IO | ||
| automatic detection of transmission rate | Yes | |
| Transmission rate, max. | 100 Mbit/s; full duplex | |
| Number of RJ45 ports | 2 | |
| Protocols | ||
| Supports protocol for PROFINET IO | Yes | |
| Protocols (Ethernet) | ||
| SNMP | Yes | |
| ping | Yes | |
| ARP | Yes | |
| Interrupts/diagnostics/status information | ||
| Alarms | Yes | |
| Diagnostics function | Yes | |
| Diagnostics indication LED | ||
| Bus fault BF (red) | Yes | |
| Group error SF (red) | Yes | |
| Monitoring 24 V voltage supply ON (green) | Yes | |
| Connection to network LINK (green) | Yes | |
| Transmit/receive RX/TX (yellow) | Yes | |
| Potential separation | ||
| between backplane bus and electronics | No | |
| between supply voltage and electronics | No | |
| between Ethernet and electronics | Yes | |
| Permissible potential difference | ||
| between different circuits | 75 V DC/60 V AC | |
| Isolation | ||
| Isolation tested with | 500 V DC | |
| Dimensions | ||
| Width | 45 mm | |
| Height | 119.5 mm | |
| Depth | 75 mm | |
| Weights | ||
| Weight, approx. | 135 g | |
| last modified: | 03/13/2019 | |
