6ES7151-1AB01-0AB0 SIMATIC DP, INTERFACE MODULE
From SIEMENS
| SIMATIC DP, INTERFACE MODULE IM151-1 FO FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 128 BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 POWER, ELECTR. OR MOTOR STARTER MODULES CONNECTABLE; BUS INTERFACING VIA INTEGR. FO INTERFACE INCL. TERMINATING MODULE | ||
| General information | ||
| Vendor identification (VendorID) | 806Bh | |
| Supply voltage | ||
| Mains buffering | ||
| Mains/voltage failure stored energy time | 20 ms | |
| Input current | ||
| from supply voltage 1L+, max. | 200 mA | |
| Output current | ||
| for backplane bus (5 V DC), max. | 700 mA | |
| Power loss | ||
| Power loss, typ. | 3.3 W | |
| Address area | ||
| Addressing volume | ||
| Inputs | 128 byte | |
| Outputs | 128 byte | |
| Interfaces | ||
| Interface physics, FOC | Yes; 4 x Simplex socket | |
| PROFIBUS DP | ||
| Transmission rate, max. | 12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 12 Mbit/s | |
| SYNC capability | Yes | |
| FREEZE capability | Yes | |
| Direct data exchange (slave-to-slave communication) | Yes | |
| Cable length, max. | 2 m | |
| Protocols | ||
| PROFIBUS DP | Yes | |
| Isochronous mode | ||
| Isochronous operation (application synchronized up to terminal) | No | |
| Interrupts/diagnostics/status information | ||
| Alarms | No | |
| Diagnostics function | Yes | |
| Diagnostics indication LED | ||
| Bus fault BF (red) | Yes | |
| Group error SF (red) | Yes | |
| Monitoring 24 V voltage supply ON (green) | Yes | |
| Potential separation | ||
| between backplane bus and electronics | No | |
| between supply voltage and electronics | No | |
| Permissible potential difference | ||
| between different circuits | 500 V DC | |
| Isolation | ||
| Isolation tested with | 57 V DC/60 V AC | |
| Dimensions | ||
| Width | 45 mm | |
| Height | 119.5 mm | |
| Depth | 75 mm | |
| Weights | ||
| Weight, approx. | 150 g | |
| last modified: | 03/13/2019 | |
