| SIMATIC DP, ET 200ECO PN, 16 DO 24 V DC/1.3 A; 8xM12, duplicate assignment; Degree of protection IP67 |
| General information |
| Vendor identification (VendorID) | 002AH |
| Device identifier (DeviceID) | 0306H |
| Supply voltage |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Load voltage 2L+ |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Input current |
| Current consumption, typ. | 100 mA |
| from supply voltage 1L+, max. | 4 A |
| from load voltage 2L+, max. | 4 A |
| Power loss |
| Power loss, typ. | 5.5 W |
| Digital outputs |
| Number of digital outputs | 16 |
| in groups of | 8 |
| Short-circuit protection | Yes |
| Response threshold, typ. | 1.8 A |
| Limitation of inductive shutdown voltage to | Typ. (L1+, L2+) -47 V |
| Controlling a digital input | Yes |
| Switching capacity of the outputs |
| on lamp load, max. | 5 W |
| Output current |
| for signal "1" rated value | 1.3 A; Maximum |
| for signal "0" residual current, max. | 1.5 mA |
| Parallel switching of two outputs |
| for uprating | No |
| for redundant control of a load | Yes |
| Switching frequency |
| with resistive load, max. | 100 Hz |
| with inductive load, max. | 0.5 Hz |
| on lamp load, max. | 1 Hz |
| Total current of the outputs (per group) |
| all mounting positions |
| — up to 60 °C, max. | 3.9 A |
| Cable length |
| unshielded, max. | 30 m |
| Interfaces |
| Transmission procedure | 100BASE-TX |
| Number of PROFINET interfaces | 1 |
| 1. Interface |
| Interface types |
| integrated switch | Yes |
| Interface types |
| M12 port |
| Transmission procedure | 100BASE-TX |
| Autonegotiation | Yes |
| Autocrossing | Yes |
| Transmission rate, max. | 100 Mbit/s |
| Protocols |
| Supports protocol for PROFINET IO | Yes |
| PROFINET CBA | No |
| PROFIsafe | No |
| PROFINET IO Device |
| Services |
| — IRT with the option "high flexibility" | Yes |
| — Prioritized startup | Yes |
| Open IE communication |
| TCP/IP | No |
| SNMP | Yes |
| DCP | Yes |
| LLDP | Yes |
| ping | Yes |
| ARP | Yes |
| Interrupts/diagnostics/status information |
| Diagnostics function | Yes |
| Alarms |
| Diagnostic alarm | Yes |
| Diagnostic messages |
| Diagnostic information readable | Yes |
| Monitoring the supply voltage | Yes; Green "ON" LED |
| Wire-break in actuator cable | Yes |
| Short-circuit | Yes |
| Group error | Yes; Red/yellow "SF/MT" LED |
| Potential separation |
| between the load voltages | Yes |
| between load voltage and all other switching components | No |
| between Ethernet and electronics | Yes |
| Potential separation channels |
| between the channels | No |
| Isolation |
| tested with |
| 24 V DC circuits | 707 V DC (type test) |
| Degree and class of protection |
| IP degree of protection | IP67 |
| Standards, approvals, certificates |
| Suitable for safety-related tripping of standard modules | Yes |
| Highest safety class achievable for safety-related tripping of standard modules |
| Performance level according to ISO 13849-1 | PL d |
| Category according to ISO 13849-1 | Cat. 3 |
| SILCL according to IEC 62061 | SILCL 2 |
| Connection method |
| Design of electrical connection | 4/5-pin M12 circular connectors |
| Dimensions |
| Width | 60 mm |
| Height | 175 mm |
| Depth | 49 mm |
| Weights |
| Weight, approx. | 910 g |
| last modified: | 03/13/2019 |
