| SIMATIC DP, ET 200ECO PN, 8 DI 24 V DC; 4xM12, Duplicate assignment, Degree of protection IP67 |
| General information |
| Vendor identification (VendorID) | 002AH |
| Device identifier (DeviceID) | 0306H |
| Supply voltage |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Input current |
| Current consumption, typ. | 100 mA |
| Encoder supply |
| Number of outputs | 4 |
| 24 V encoder supply |
| Short-circuit protection | Yes; Electronic |
| Output current, max. | 100 mA; per output |
| Power loss |
| Power loss, typ. | 5.5 W |
| Digital inputs |
| Number of digital inputs | 8 |
| in groups of | 2 |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Number of simultaneously controllable inputs |
| all mounting positions |
| — up to 60 °C, max. | 8 |
| Input voltage |
| Rated value (DC) | 24 V |
| for signal "0" | -3 to +5V |
| for signal "1" | +11 to +30V |
| Input current |
| for signal "1", typ. | 7 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — at "0" to "1", max. | typically 3 ms |
| — at "1" to "0", max. | typically 3 ms |
| Cable length |
| unshielded, max. | 30 m |
| Encoder |
| Connectable encoders |
| 2-wire sensor | Yes |
| — permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Interfaces |
| Transmission procedure | 100BASE-TX |
| Number of PROFINET interfaces | 1 |
| 1. Interface |
| Interface types |
| integrated switch | Yes |
| M12 port | Yes |
| Interface types |
| M12 port |
| Transmission procedure | 100BASE-TX |
| Autonegotiation | Yes |
| Autocrossing | Yes |
| Transmission rate, max. | 100 Mbit/s |
| Protocols |
| Supports protocol for PROFINET IO | Yes |
| PROFINET CBA | No |
| PROFIsafe | No |
| PROFINET IO Device |
| Services |
| — IRT with the option "high flexibility" | Yes |
| — Prioritized startup | Yes |
| Open IE communication |
| TCP/IP | No |
| SNMP | Yes |
| DCP | Yes |
| LLDP | Yes |
| ping | Yes |
| ARP | Yes |
| Interrupts/diagnostics/status information |
| Diagnostics function | Yes |
| Alarms |
| Diagnostic alarm | Yes |
| Diagnostic messages |
| Diagnostic information readable | Yes |
| Monitoring the supply voltage | Yes; Green "ON" LED |
| Wire-break in signal transmitter cable | Yes |
| Short-circuit encoder supply | Yes; Per channel group |
| Group error | Yes; Red/yellow "SF/MT" LED |
| Potential separation |
| between the load voltages | Yes |
| between load voltage and all other switching components | No |
| between Ethernet and electronics | Yes |
| Potential separation channels |
| between the channels | No |
| Isolation |
| tested with |
| 24 V DC circuits | 707 V DC (type test) |
| Test voltage for interface, rms value [Vrms] | 1 500 V; According to IEEE 802.3 |
| Degree and class of protection |
| IP degree of protection | IP65/67 |
| Connection method |
| Design of electrical connection | 4/5-pin M12 circular connectors |
| Dimensions |
| Width | 30 mm |
| Height | 200 mm |
| Depth | 49 mm |
| Weights |
| Weight, approx. | 550 g |
| last modified: | 03/29/2019 |
