| *** SPARE PART*** SIMATIC DP, ELECTRONIC BLOCK FOR ET 200L-SC, 16 DI/16 DO, 24V DC/0.5 A |
General information |
Usable terminal block | TB 32L |
Supply voltage |
Rated value (DC) | 24 V |
Reverse polarity protection | Yes |
Mains buffering |
Mains/voltage failure stored energy time | 20 ms |
Load voltage L+ |
Rated value (DC) | 24 V |
Input current |
from supply voltage L+, max. | 180 mA |
from load voltage L+ (without load), max. | 50 mA; Per load group (L1+ or L2+ / L3+) |
Power loss |
Power loss, typ. | 5 W |
Digital inputs |
Number of digital inputs | 16; Expansion: digital and analog with SIMATIC SC |
Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
Number of simultaneously controllable inputs |
Number of simultaneously controllable inputs | 16 |
Input voltage |
Rated value (DC) | 24 V |
for signal "0" | -30 to +5V |
for signal "1" | 13 to 30V |
Input current |
for signal "1", typ. | 5 mA |
Input delay (for rated value of input voltage) |
for standard inputs |
— at "0" to "1", min. | 2 ms |
— at "0" to "1", max. | 4.5 ms |
Cable length |
shielded, max. | 1 000 m |
unshielded, max. | 600 m |
Digital outputs |
Number of digital outputs | 16; Expansion: digital and analog with SIMATIC SC |
Short-circuit protection | Yes; Electronic |
Output voltage |
Rated value (DC) | 24 V |
for signal "1", min. | Ua - 3 V |
Output current |
for signal "1" permissible range for 0 to 60 °C, max. | 0.5 A |
for signal "0" residual current, max. | 1 mA |
Switching frequency |
with resistive load, max. | 100 Hz |
with inductive load, max. | 0.5 Hz |
on lamp load, max. | 8 Hz |
Total current of the outputs (per module) |
horizontal installation |
— up to 30 °C, max. | 4 A |
— up to 40 °C, max. | 3 A |
— up to 60 °C, max. | 2 A |
all other mounting positions |
— up to 40 °C, max. | 2 A |
Cable length |
shielded, max. | 1 000 m |
unshielded, max. | 600 m |
Interfaces |
PROFIBUS DP |
Transmission rate, max. | 1.5 Mbit/s |
SYNC capability | Yes |
FREEZE capability | Yes |
Interrupts/diagnostics/status information |
Alarms | No |
Diagnostics function | Yes |
Diagnostics indication LED |
Bus fault BF (red) | Yes |
Status indicator digital input (green) | Yes |
Status indicator digital output (green) | Yes |
Monitoring 24 V voltage supply ON (green) | Yes |
Potential separation |
Potential separation digital inputs |
between the channels | No |
between the channels and PROFIBUS DP | Yes |
Potential separation digital outputs |
between the channels | No |
Isolation |
Isolation tested with | 500 V DC |
Dimensions |
Width | 145 mm |
Height | 60 mm |
Depth | 60.5 mm |
Weights |
Weight, approx. | 130 g |
last modified: | 03/13/2019 |