| *** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 16 DO 24V DC, 2A, DEGR. OF PROTECT. IP20,STANDARD |
| General information |
| Usable terminal block | TB2/DC, TB2-4/DC, TB4/DC, TB4-4/DC |
| Supply voltage |
| Rated value (DC) | 24 V; L1+, L2+, L3+, L4+, L5+; value at t < 0.5 s: 35 V |
| permissible range, lower limit (DC) | 18.5 V |
| permissible range, upper limit (DC) | 30.2 V |
| Input current |
| Current consumption, typ. | 100 mA; From L5+; logic |
| I²t | 0.05 A²·s; with starting current inrush |
| Power loss |
| Power loss, max. | 7 W |
| Digital outputs |
| Number of digital outputs | 16 |
| Short-circuit protection | Yes; Electronic |
| Limitation of inductive shutdown voltage to | typ. (L1+ to L4+) -50 V |
| Controlling a digital input | Yes |
| Switching capacity of the outputs |
| on lamp load, max. | 10 W |
| Output voltage |
| Rated value (DC) | 24 V |
| for signal "0", max. | 2 V; idling |
| for signal "1", min. | UE -3 V |
| Output current |
| for signal "1" permissible range, max. | 2 A; in groups of 4 |
| for signal "0" residual current, max. | 1 mA |
| Switching frequency |
| with resistive load, max. | 100 Hz |
| with inductive load, max. | 0.5 Hz |
| on lamp load, max. | 8 Hz |
| Total current of the outputs (per group) |
| all mounting positions |
| — up to 60 °C, max. | 4 A |
| Cable length |
| unshielded, max. | 100 m |
| Interfaces |
| PROFIBUS DP |
| Transmission rate, max. | 12 Mbit/s |
| Protocols |
| Bus protocol/transmission protocol | PROFIBUS DP |
| PROFIBUS DP |
| Services |
| — SYNC capability | Yes |
| Interrupts/diagnostics/status information |
| Diagnostics indication LED |
| RUN LED | Yes |
| Bus fault BF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Potential separation |
| between electronic block and PROFIBUS DP | Yes |
| Potential separation digital outputs |
| Potential separation digital outputs | Yes |
| between the channels, in groups of | 4 |
| Degree and class of protection |
| Degree of protection acc. to EN 60529 | IP20 |
| Ambient conditions |
| Ambient temperature during operation |
| horizontal installation, min. | 0 °C |
| horizontal installation, max. | 60 °C; 40°C for other mountings |
| Air pressure acc. to IEC 60068-2-13 |
| permissible range, lower limit | 795 hPa |
| permissible range, upper limit | 1 080 hPa |
| Relative humidity |
| Operation, min. | 15 % |
| Operation, max. | 95 %; RH class 2 in accordance with IEC 1131-2 |
| Vibrations |
| Operation, tested according to IEC 60068-2-6 | Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g) |
| Shock testing |
| tested according to IEC 60068-2-27 | Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms |
| Connection method |
| Design of electrical connection for the inputs and outputs | Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection |
| Dimensions |
| Width | 235 mm; EB and TB |
| Height | 130 mm; EB and TB |
| Depth | 60 mm; EB and TB |
| Weights |
| Weight, approx. | 900 g; EB and TB |
| last modified: | 03/13/2019 |
