6ES7131-1BH12-0XB0 ET200L, EL-BLOCK, 16DI, DC 24V, EXPAND.
From SIEMENS
| *** SPARE PART*** SIMATIC DP, ELECTRONIC BLOCK FOR ET 200L, DIGITAL, 16 DI, 24V DC, EXPANDABLE WITH MAX. 16 CHANNELS WITH TERM. BLOCK TB 16SC OF SMART CONNECT | ||
| General information | ||
| Usable terminal block | TB 16L | |
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| Reverse polarity protection | Yes | |
| Mains buffering | ||
| Mains/voltage failure stored energy time | 20 ms | |
| Load voltage L+ | ||
| Rated value (DC) | 24 V | |
| Input current | ||
| from supply voltage L+, max. | 180 mA | |
| from load voltage L+ (without load), max. | 50 mA; Per load group (L1+ or L2+ / L3+) | |
| Power loss | ||
| Power loss, typ. | 4 W | |
| Digital inputs | ||
| Number of digital inputs | 16; Expansion: digital and analog with SIMATIC SC | |
| Input voltage | ||
| Rated value (DC) | 24 V | |
| for signal "0" | -30 to +5V | |
| for signal "1" | 13 to 30V | |
| Input current | ||
| for signal "1", typ. | 5 mA | |
| Input delay (for rated value of input voltage) | ||
| for standard inputs | ||
| — at "0" to "1", min. | 2 ms | |
| — at "0" to "1", max. | 4.5 ms | |
| Cable length | ||
| shielded, max. | 1 000 m | |
| unshielded, max. | 600 m | |
| Encoder | ||
| Connectable encoders | ||
| 2-wire sensor | Yes | |
| — permissible quiescent current (2-wire sensor), max. | 1.5 mA | |
| Interfaces | ||
| PROFIBUS DP | ||
| Transmission rate, max. | 1.5 Mbit/s | |
| SYNC capability | Yes | |
| FREEZE capability | Yes | |
| Interrupts/diagnostics/status information | ||
| Alarms | No | |
| Diagnostics function | Yes | |
| Diagnostics indication LED | ||
| Bus fault BF (red) | Yes | |
| Status indicator digital input (green) | Yes | |
| Monitoring 24 V voltage supply ON (green) | Yes | |
| Potential separation | ||
| Potential separation digital inputs | ||
| between the channels | No | |
| between the channels and PROFIBUS DP | Yes | |
| Isolation | ||
| Isolation tested with | 500 V DC | |
| last modified: | 03/29/2019 | |
