| SITOP BUFFER MODULE |
| SITOP PSE201U buffer module Buffer time 100 ms to 10 s Depending on load current |
| Input |
| Supply voltage at DC Rated value | 24 V |
| Voltage curve at input | DC |
| input voltage range | 24 ... 28.8 V DC |
| Mains buffering |
| Design of the mains power cut bridging-connection | Backup time: with 40 A load current: 200 ms; with 20 A load current: 400 ms; with 10 A load current: 800 ms; with 5 A load current: 1.6 s. Reduces the backup time by 100 ms in combination with 6EP1 437-3BA10. Maximum backup time 100 ms in combination with 6EP1 336-2BA20. |
| Output |
| Formula for output voltage | Vin - approx. 1 V |
| Output current | |
| Rated value | 40 A |
| Signaling |
| Display version | |
| for normal operation | Green LED for "supply voltage > 20.5 V" |
| Interface |
| Product component PC interface | No |
| Design of the interface | without |
| Safety |
| Galvanic isolation between entrance and outlet | Yes |
| Operating resource protection class | Class I |
| Certificate of suitability | |
| CE marking | Yes |
| as approval for USA | UL-Listed (UL 508), File E197259, CSA (CSA C22.2 No. 14, CSA C22.2 No. 107.1) |
| relating to ATEX | IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4 |
| C-Tick | No |
| Shipbuilding approval | ABS, DNV GL |
| Protection class IP | IP20 |
| EMC |
| Standard | |
| for emitted interference | EN 55022 Class B |
| for interference immunity | EN 61000-6-2 |
| Operating data |
| Ambient temperature | |
| during operation | -25 ... +70 °C; with natural convection |
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
| Environmental category acc. to IEC 60721 | Climate class 3K3, no condensation |
| Mechanics |
| Type of electrical connection | screw-type terminals |
| at input | +: 1 screw terminal for 0.5 ... 10 mm² |
| at output | -: 1 screw terminal for 0.5 ... 10 mm² |
| for control circuit and status message | - |
| Width of the enclosure | 70 mm |
| Height of the enclosure | 125 mm |
| Depth of the enclosure | 125 mm |
| Required spacing | |
| top | 50 mm |
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| Net weight | 1.2 kg |
| Product feature of the enclosure housing for side-by-side mounting | Yes |
| Mounting type | Snaps onto DIN rail EN 60715 35x7.5/15 |
| MTBF at 40 °C | 2 538 071 h |
| Reference code acc. to DIN EN 81346-2 | T |
| Other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| |
