| SIMATIC ET 200SP HA, analog HART input module, AI 16XI 2-wire HART HA, suitable for terminal block H1, M1, color code CC01, channel diagnostics, 16-bit, +/-0.1%, |
| General information |
| Product type designation | AI 16 x I 2-wire mA HART |
| Firmware version | V1.0 |
| FW update possible | Yes |
| Usable terminal block | TB type H1, M1 and N0 |
| Color code for module-specific color identification plate | CC01 |
| Product function |
| I&M data | Yes; I&M0 to I&M3 |
| Engineering with |
| PCS 7 configurable/integrated as of version | V9.0 |
| Redundancy |
| Redundancy capability | Yes; With TB type M1 |
| CiR – Configuration in RUN |
| Reparameterization possible in RUN | Yes |
| Supply voltage |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current |
| Current consumption (rated value) | 80 mA; without sensor supply |
| Current consumption, max. | 90 mA; without sensor supply |
| Encoder supply |
| 24 V encoder supply |
| 24 V | Yes |
| Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 1.5 A) |
| Output current per channel, max. | 0.5 A |
| Output current per module, max. | 2 A |
| Power loss |
| Power loss, typ. | 4.5 W; without sensor supply |
| Address area |
| Address space per module |
| Address space per module, max. | 34 byte; 32-byte inputs and 2 bytes for QI information |
| Address space per module with HART, max. | 74 byte; 32-byte inputs and 2 bytes for QI information, 40-byte inputs for HART |
| Address space per module with MultiHART, max. | 41 byte; 32-byte inputs for HART and 2 bytes for QI information, 6-byte inputs for HART, and 1-byte output for MultiHART command |
| Analog inputs |
| Number of analog inputs | 16 |
| permissible input current for current input (destruction limit), max. | 30 mA |
| Input ranges (rated values), currents |
| 0 to 20 mA | Yes; 16 bit incl. sign |
| Input resistance (0 to 20 mA) | 250 Ω |
| 4 mA to 20 mA | Yes; 16 bit incl. sign |
| Input resistance (4 mA to 20 mA) | 250 Ω |
| Cable length |
| shielded, max. | 800 m; Shielded |
| Analog value generation for the inputs |
| Measurement principle | integrating (Sigma-Delta) |
| Integration and conversion time/resolution per channel |
| Resolution with overrange (bit including sign), max. | 16 bit; 15 bit at 0 ... 10 mA and 60 Hz interference suppression |
| Integration time, parameterizable | Yes; channel by channel |
| Smoothing of measured values |
| parameterizable | Yes; none, weak, medium, strong, channel-by-channel |
| Encoder |
| Connection of signal encoders |
| for current measurement as 2-wire transducer | Yes |
| Errors/accuracies |
| Linearity error (relative to input range), (+/-) | 0.01 % |
| Temperature error (relative to input range), (+/-) | 0.005 %/K |
| Crosstalk between the inputs, min. | 60 dB |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % |
| Operational error limit in overall temperature range |
| Current, relative to input range, (+/-) | 0.5 % |
| Basic error limit (operational limit at 25 °C) |
| Current, relative to input range, (+/-) | 0.1 % |
| Interrupts/diagnostics/status information |
| Diagnostics function | Yes |
| Alarms |
| Diagnostic alarm | Yes |
| Limit value alarm | Yes; two upper and two lower limit values in each case |
| Diagnostic messages |
| Monitoring the supply voltage | Yes |
| Wire-break | Yes; channel by channel |
| Short-circuit | Yes; Channel-by-channel, short-circuit of the encoder supply to ground or of an input to the encoder supply |
| Overflow/underflow | Yes; channel by channel |
| Diagnostics indication LED |
| MAINT LED | Yes; yellow LED |
| Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Channel status display | Yes; Green LED |
| for channel diagnostics | Yes; Red LED |
| for module diagnostics | Yes; green/red DIAG LED |
| Potential separation |
| Potential separation channels |
| between the channels | No |
| between the channels and backplane bus | Yes |
| Between the channels and load voltage L+ | No |
| Isolation |
| Isolation tested with | 1 500 V DC/1 min, type test |
| Ambient conditions |
| Ambient temperature during operation |
| horizontal installation, min. | -40 °C |
| horizontal installation, max. | 70 °C; Observe derating |
| vertical installation, min. | -40 °C |
| vertical installation, max. | 60 °C; Observe derating |
| Dimensions |
| Width | 22.5 mm |
| Height | 115 mm |
| Depth | 138 mm |
| Weights |
| Weight, approx. | 148 g |
| last modified: | 03/13/2019 |
