| ***SPARE PART*** SINVERT PVS600 PV-INVERTER, 600SERIES, IEC 50HZ, 3P NOM. ACTIVE POWER (AC): 600KVA GRID CONNECT. MV TRANS, MPP-RANGE: 570-750V, UMAX 820VDC, 3 DC-INPUTS, IP20, AIR COOLING, INVERTER UNIT AMOUNT: 1, OPTIONS AVAILABLE. FOR: 1000V-OPTION (UDCMAX 1000V), PV FIELD POSITIVE GROUNDING, PV FIELD MINUS GROUNDING , SYMMETRY MONITORING, CABINET HEATING, SINVERT PVS WARRANTY 5 YEARS, |
| General technical data: |
| Product type designation | | SINVERT PVS600 |
| Product designation | | Photovoltaic inverter |
| Performance class for PV inverters | | 600 |
| Efficiency | | |
| maximum possible | % | 98.7 |
| acc. to Euro | % | 98.4 |
| acc. to CEC | % | 98.5 |
| Note | | Data without internal power supply |
| Design of PV inverter unit | | single device |
| Number of PV inverter sub-units | | 1 |
| Type of installation | | indoor installation |
| Protection class IP | | IP20 |
| Operating resource protection class | | I |
| Design of the interface for communication | | Ethernet |
| A-rated sound power level maximum | dB | 80 |
| Design of the display | | LCD-TFT |
| National language on the display screen selectable | | English, German |
| Connection method for PV inverters | | without transformer |
| Outputs: |
| Apparent power output on the AC side | | |
| Rated value | kV·A | 600 |
| Note | | for AC nominal voltage, supply air temperature ≤ 40°C |
| Supplied active power on the AC side | | |
| in permanent operation Rated value | kW | 600 |
| maximum | kW | 600 |
| Note | | for AC nominal voltage, supply air temperature ≤ 40°C, cos phi = 1 |
| Inductive power factor | | 0.8 ... 1 |
| Capacitive power factor | | 0.8 ... 1 |
| Phase number | | 3 |
| Output voltage on the AC side | | |
| for infeed operation Rated value | V | 370 |
| for infeed operation | V | 314.5 ... 407 |
| Line frequency 1 | | |
| for infeed operation Rated value | Hz | 50 |
| for infeed operation | Hz | 47.5 ... 51.5 |
| Current supplied on the AC side | | |
| maximum | A | 936 |
| Harmonic distortion factor maximum | % | 2 |
| Grounding concept on the AC side | | IT |
| Design of the overvoltage protection on the AC side | | type 1/2 |
| Inputs: |
| MPP voltage | V | 570 ... 750 |
| Consumed active power on the DC side Rated value | kW | 613 |
| Input voltage on the DC side | | |
| for start of the infeed mode | V | 700 |
| for possible infeed operation | V | 570 ... 750 |
| Rated value | V | 570 |
| maximum permissible | V | 820 |
| Total consumed power on the DC side maximum | A | 1 104 |
| Number of inputs on the DC side | | 3 |
| Input current per DC input maximum | A | 368 |
| Product component on the DC side Overcurrent protection per DC input | | Yes |
| Overcurrent strength per DC input Rated value | A | 368 |
| Design of the overvoltage protection on the DC side | | type 2 |
| Auxiliary circuit: |
| Auxiliary voltage | | |
| Rated value | V | 400 |
| minimum | V | 340 |
| maximum | V | 440 |
| | |
| Auxiliary voltage frequency | | |
| — 1 Rated value | Hz | 50 |
| Grounding concept for external auxiliary power supply | | TN-S |
| Consumed active power from external auxiliary voltage | | |
| for infeed operation | | |
| — maximum | W | 2 650 |
| in night-time operating mode | | |
| — without cabinet heating maximum | W | 190 |
| — with cabinet heating maximum | W | 440 |
| Ambient conditions: |
| Installation altitude | | |
| at rated active power | m | 0 ... 1 000 |
| minimum | m | 0 |
| maximum | m | 2 000 |
| Incoming air temperature at rated active power value maximum | °C | 40 |
| Ambient temperature | | |
| during operation | °C | 0 ... 50 |
| during storage | °C | -25 ... +70 |
| during transport | °C | -25 ... +70 |
| Relative humidity | | |
| during operation | % | 0 ... 95 |
| during storage | % | 0 ... 95 |
| during transport | % | 0 ... 95 |
| Environmental category | | 3K3 |
| Type of cooling | | Forced-air cooling via fan |
| Cooling air flow | m³/h | 6 500 |
| Type of ventilation | | air intake cabinet front/air outlet cabinet top |
| Mechanical data: |
| Width of PV inverter subunit | mm | 2 700 |
| Height of PV inverter subunit | mm | 2 100 |
| Depth of PV inverter subunit | mm | 730 |
| Weight of the single device | kg | 2 085 |
| Weight of PV inverter subunit | kg | 2 085 |
| Mounting type | | Floor mounting installation |
