6AG2124-0GC13-1AX0
SIPLUS HMI TP700 OUTDOOR T1 RAIL

From SIEMENS

SIPLUS HMI TP700 OUTDOOR RAIL -25°C...60°C T1 with 70°C for 10 min with conformal coating based on 6AV2124-0GC13-0AX0. TP700 Comfort Outdoor, Comfort "Panel, Touch operation, 7""" widescreen TFT display, 16 million colors, PROFINET interface, MPI/PROFIBUS DP interface, 12 MB configuration memory, Windows CE 6.0, configurable WINCC Comfort V13 SP1 and higher, HSP
General information
Product type designationTP700 Outdoor
Display
Design of displayTFT, bonded, daylight-readable
Screen diagonal7 in
Display width152.4 mm
Display height91.4 mm
Number of colors16 777 216
Resolution (pixels)
Horizontal image resolution800 Pixel
Vertical image resolution480 Pixel
Backlighting
MTBF backlighting (at 25 °C)50 000 h
Backlight dimmableYes; LED, can be dimmed manually or automatically
Control elements
Keyboard fonts
Function keys
— Number of function keys0
Keys with LEDNo
System keysNo
Numeric keyboardYes; Onscreen keyboard
alphanumeric keyboardYes; Onscreen keyboard
Touch operation
Design as touch screenYes; analog, resistive
Expansions for operator control of the process
DP direct LEDs (LEDs as S7 output I/O)
— F1...Fx0
Direct keys (keys as S7 input I/O)
— F1...Fx0
Direct keys (touch buttons as S7 input I/O)32
Installation type/mounting
Mounting positionvertical
Mounting in portrait format possibleYes
Mounting in landscape format possibleYes
maximum permissible angle of inclination without external ventilation35°
Supply voltage
Type of supply voltageDC
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Input current
Current consumption (rated value)0.7 A
Starting current inrush I²t0.5 A²·s
Power
Active power input, typ.17 W
Processor
Processor typeX86
Memory
FlashYes
RAMYes
Memory available for user data12 Mbyte
Type of output
Info LEDNo
Power LEDNo
Error LEDNo
Acoustics
BuzzerNo
SpeakerYes
Time of day
Clock
Hardware clock (real-time)Yes
Software clockNo
retentiveYes; Back-up duration typically 6 weeks
synchronizableYes
Interfaces
Number of industrial Ethernet interfaces2
Number of RS 485 interfaces1; RS 422 / 485 combined
Number of RS 422 interfaces1
Number of RS 232 interfaces0
Number of USB interfaces2; USB 2.0
USB Mini B1; 5-pole
Number of 20 mA interfaces (TTY)0
Number of parallel interfaces0
Number of other interfaces0
Number of SD card slots2
With software interfacesNo
Industrial Ethernet
Industrial Ethernet status LED2
Number of ports of the integrated switch2
Protocols
PROFINETYes
Supports protocol for PROFINET IOYes
IRTYes
PROFIBUSYes
MPIYes
Protocols (Ethernet)
TCP/IPYes
DHCPYes
SNMPYes
DCPYes
LLDPYes
WEB characteristics
HTTPYes
HTTPSNo
HTMLYes
XMLNo
CSSYes
Active XNo
JavaScriptYes
Java VMNo
Redundancy mode
MRPYes
Further protocols
CANNo
EtherNet/IPYes
MODBUSYes
Isolation
Isolation tested with707 V DC (type test) and according to EN 50155 (routine test)
EMC
Emission of radio interference acc. to EN 55 011
Limit class A, for use in industrial areasYes
Limit class B, for use in residential areasNo
Degree and class of protection
IP (at the front)IP66
Enclosure Type 4 at the frontYes
Enclosure Type 4x at the frontYes
IP (rear)IP20
Standards, approvals, certificates
CE markYes
Railway application
EN 50121-3-2Yes; EMC for rail vehicles
EN 50121-4Yes; EMC for signal and telecommunications systems
EN 50124-1Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
EN 50125-1Yes; Rail vehicles - see ambient conditions
EN 50125-2Yes; Stationary electrical equipment - see ambient conditions
EN 50125-3Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
EN 50155Yes; Rail vehicles - temperature class T1, horizontal and vertical mounting position, salt spray class ST2
EN 61373Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
Fire protection acc. to EN 45545-2Yes; Rail vehicles - verification on request
Ambient conditions
Suited for indoor useYes
Suited for outdoor useYes
Ambient temperature during operation
Operation (vertical installation)
— For vertical installation, min.-30 °C; = Tmin
— For vertical installation, max.60 °C; (55 °C, see entry ID: 64847814)
Operation (max. tilt angle)
— At maximum tilt angle, min.-30 °C; = Tmin
— At maximum tilt angle, min.50 °C; = Tmax
Operation (vertical installation, portrait format)
— For vertical installation, min.-30 °C; = Tmin
— For vertical installation, max.50 °C; = Tmax
Operation (max. tilt angle, portrait format)
— At maximum tilt angle, min.-30 °C; = Tmin
— At maximum tilt angle, min.45 °C; = Tmax
Ambient temperature during storage/transportation
min.-30 °C
max.70 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.2 000 m
Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)
Relative humidity
With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Coolants and lubricants
— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
Use on land craft, rail vehicles and special-purpose vehicles
— to biologically active substances according to EN 60721-3-5Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
— to chemically active substances according to EN 60721-3-5Yes; Class 5C3 (RH < 75 %) incl. salt spray acc. to EN 50155 (ST2); *
— to mechanically active substances according to EN 60721-3-5Yes; Class 5S3 incl. sand, dust; *
Remark
— Note regarding classification of environmental conditions acc. to EN 60721* The supplied plug covers must remain in place over the unused interfaces during operation!
Conformal coating
Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high availability
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Electronic equipment on rolling stock acc. to EN 50155Yes; Class PC2 protective coating acc. to EN 50155:2017
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A
Operating systems
proprietaryNo
pre-installed operating system
Windows CEYes
Configuration
Message indicatorYes
Alarm system (incl. buffer and acknowledgment)Yes
Process value display (output)Yes
Process value default (input) possibleYes
Recipe managementYes
Configuration software
STEP 7 Basic (TIA Portal)No
STEP 7 Professional (TIA Portal)No
WinCC flexible CompactNo
WinCC flexible StandardNo
WinCC flexible AdvancedNo
WinCC Basic (TIA Portal)No
WinCC Comfort (TIA Portal)Yes
WinCC Advanced (TIA Portal)Yes
WinCC Professional (TIA Portal)Yes
Languages
Online languages
Number of online/runtime languages32
Project languages
Languages per project32
Functionality under WinCC (TIA Portal)
LibrariesYes
Applications/options
Web browserYes
Pocket WordYes
Pocket ExcelYes
PDF ViewerYes
Media PlayerYes
SIMATIC WinCC Sm@rtServerYes
SIMATIC WinCC AuditYes
Number of Visual Basic ScriptsYes
Task planner
time-controlledYes
task-controlledYes
Help system
Number of characters per info text70
Message system
Number of alarm classes32
Bit messages
— Number of bit messages4 000
Analog messages
— Number of analog messages200
S7 alarm number procedureYes
System messages HMIYes
System messages, other (SIMATIC S7, Sinumerik, Simotion, etc.)Yes
Number of characters per message80
Number of process values per message8
Acknowledgment groupsYes
Message indicatorYes
Message buffer
— Number of entries1 024
— Circulating bufferYes
— retentiveYes
— maintenance-freeYes
Recipe management
Number of recipes300
Data records per recipe500
Entries per data record1 000
Size of internal recipe memory2 Mbyte
Recipe memory expandableYes
Variables
Number of variables per device2 048
Number of variables per screen400
Limit valuesYes
MultiplexingYes
StructuresYes
ArraysYes
Images
Number of configurable images500
Permanent window/defaultYes
Global imageYes
Image selection by PLCYes
Image number in the PLCYes
Image objects
Number of objects per image400
Text fieldsYes
I/O fieldsYes
Graphic I/O fields (graphics list)Yes
Symbolic I/O fields (text list)Yes
Date/time fieldsYes
SwitchesYes
ButtonsYes
Graphic displayYes
IconsYes
Geometric objectsYes
Complex image objects
Number of complex objects per screen20
Alarm viewYes
Trend viewYes
User viewYes
Status/controlYes
Sm@rtClient viewYes
Recipe viewYes
f(x) trend viewYes
System diagnostics viewYes
Media PlayerYes
Bar graphsYes
SlidersYes
Pointer instrumentsYes
Analog/digital clockYes
Lists
Number of text lists per project500
Number of entries per text list500
Number of graphics lists per project500
Number of entries per graphics list500
Archiving
Number of archives per device50
Number of entries per archive20 000
Message archiveYes
Process value archiveYes
Archiving methods
— Sequential archiveYes
— Short-term archiveYes
Memory location
— Memory cardYes
— USB memoryYes
— EthernetYes
Data storage format
— CSVYes
— TXTYes
— RDBYes
Security
Number of user groups50
Number of user rights32
Number of users50
Password export/importYes
SIMATIC LogonYes
Logging through printer
AlarmsYes
Report (shift log)Yes
HardcopyYes
Electronic print to fileYes; PDF, HTML
Character sets
Keyboard fonts
— US EnglishYes
Transfer (upload/download)
MPI/PROFIBUS DPYes
USBYes
EthernetYes
using external storage mediumYes; Backup/restore
Process coupling
S7-1200Yes
S7-1500Yes
S7-200Yes
S7-300/400Yes
LOGO!Yes
WinACYes
SINUMERIKYes; with SINUMERIK option package
SIMOTIONYes
Allen Bradley (EtherNet/IP)Yes
Allen Bradley (DF1)Yes
Mitsubishi (MC TCP/IP)Yes
Mitsubishi (FX)Yes
OMRON (FINS TCP)No
OMRON (LINK/Multilink)Yes
Modicon (Modbus TCP/IP)Yes
Modicon (Modbus)Yes
OPC UA ClientYes
OPC UA ServerYes
Service tools/configuration aids
Backup/Restore manuallyYes
Backup/Restore automaticallyYes
SimulationYes
Device switchoverYes
Peripherals/Options
Peripherals
PrinterYes
SIMATIC HMI MM memory card: Multi Media CardYes
SIMATIC HMI SD memory card: Secure Digital memory cardYes
SIMATIC HMI CF memory card Compact Flash CardNo
USB memoryYes
SIMATIC IPC USB Flashdrive (USB stick)Yes
SIMATIC HMI USB stickYes
Network cameraYes
Mechanics/material
Enclosure material (front)
PlasticNo
AluminumYes; Powder-coated, UV resistant
Stainless steelNo
Dimensions
Width of the housing front214 mm
Height of housing front158 mm
Mounting cutout, width197 mm
Mounting cutout, height141 mm
Overall depth67 mm
Weights
Weight without packaging1.5 kg
Weight incl. packaging1.7 kg
Other
Note:For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776
last modified:03/13/2019

External links