| Miniature circuit breaker 230 V D=70 mm 25 kA according to EN 60947-2, 1P+N, D13 |
| Model |
| Product brand name | SENTRON |
| Product designation | Miniature circuit breaker |
| General technical data |
| Number of poles | 2 |
| Number of poles / Note | 1P+N |
| Tripping characteristic class | D |
| circuit-breaker / Design | 5SY8 |
| Mechanical service life (switching cycles) / typical | 20 000 |
| Overvoltage category | III |
| Voltage |
| Type of voltage | AC/DC |
| Insulation voltage | |
| with single-phase operation / at AC / rated value | 250 V |
| Supply voltage |
| Supply voltage | |
| at AC / rated value | 230 V |
| Supply voltage frequency / rated value | 50/60 Hz |
| Protection class |
| Protection class IP | IP20, with connected conductors |
| Energy limiting class | 3 |
| Switching capacity |
| Switching capacity current | |
| at DC / acc. to IEC 60947-2 / rated value | 15 kA |
| acc. to IEC 60947-2 / rated value | 30 kA |
| Dissipation |
| Power loss [W] / for rated value of the current / at AC / in hot operating state / per pole | 1.4 W |
| Electricity |
| Tripping residual / rated value / derated current / at 40 Cel | 12.22 A |
| Current / at AC / rated value | 13 A |
| Suitability for operation | Mechanical engineering / industry |
| Product details |
| Product feature / Touch protection | Yes |
| Product component | |
| combined terminal top | Yes |
| combined terminal bottom | Yes |
| Product feature | |
| Properties for main switches in accordance with EN 60204-1 | Yes |
| halogen-free | Yes |
| sealable | Yes |
| silicon-free | Yes |
| Product extension / can be installed / supplementary devices | Yes |
| Product function |
| Product function / neutral conductor switching | Yes |
| Short circuit |
| Breaking capacity short-circuit current (Icn) | |
| at AC / acc. to UL 1077 and CSA C22.2 No.235 | 5 kA |
| Number |
| Number of test cycles / for environmental testing / acc. to IEC 60068-2-30 | 6 |
| Connections |
| Connectable conductor cross-section / stranded | |
| minimum | 0.75 mm² |
| maximum | 35 mm² |
| Connectable conductor cross-section | |
| solid | |
| — minimum | 0.75 mm² |
| — maximum | 35 mm² |
| finely stranded / with core end processing | |
| — minimum | 0.75 mm² |
| — maximum | 25 mm² |
| AWG number / as coded connectable conductor cross section | |
| minimum | 14 |
| maximum | 4 |
| Tightening torque [lbf·in] / with screw-type terminals | |
| minimum | 22 lbf·in |
| maximum | 26 lbf·in |
| Tightening torque / with screw-type terminals | |
| minimum | 2.5 N·m |
| maximum | 3 N·m |
| Position / of power supply cord | Any |
| Mechanical Design |
| Height | 90 mm |
| Width | 36 mm |
| Depth | 76 mm |
| Mounting position | any |
| Installation depth | 70 mm |
| Number of width units | 2 |
| Mounting type | Quick assembly system |
| Net weight | 305 g |
| Environmental conditions |
| Degree of pollution | 3 |
| Influence of the surrounding temperature | Max. 95% humidity |
| Vibration resistance / acc. to IEC 60068-2-6 | 50m/s² at 25 to 150Hz and 60m/s² at 35Hz (4sec) |
| Ambient temperature | |
| minimum | -25 °C |
| maximum | 55 °C |
| during storage / minimum | -40 °C |
| during storage / maximum | 75 °C |
