| AS-i data decoupler 1 x 4 A Screw terminals, AS-i single Data decoupling module IP20, SlimLine S22.5 Screw terminals Overall width module 22.5 mm IN: 24 V / 30 V DC OUT: 1 x AS-i, 4 A Integrated overload protection Integrated ground fault detection Signaling contact Remote reset |
| General technical data: |
| Product designation | | Single data decoupling module |
| Design of the product | | SlimLine S22.5 - Module to beused in the IP20 control cabinet |
| Protection class IP | | IP20 |
| Installation altitude at height above sea level maximum | m | 2 000 |
| Ambient temperature | | |
| during operation | °C | -25 ... +70 |
| during storage | °C | -40 ... +85 |
| Relative humidity at 25 °C during operation maximum | % | 70 |
| Reference indentifier acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | | A |
| Reference identifier acc. to DIN EN 61346-2 | | A |
| Supplied active power | W | 120 |
| Mechanical service life (switching cycles) of the signaling contacts typical | | 1 000 000 |
| Product function | | |
| Auto-reset | | No |
| External reset | | Yes |
| Manual RESET | | Yes |
| Ground fault detection | | Yes |
| Test function of signaling contacts | | Yes |
| suitable for grounded AS-i networks | | Yes |
| adapted for non-grounded AS-i networks | | Yes |
| suitable for AS-i Power24V | | Yes |
| sequential connected time-delay | | No |
| AS-interface data decoupling | | Yes |
| Reset function | | yes |
| Adjustable pick-up value current of the current-dependent overload release | A | 2.5 ... 4 |
| Number of electrical connections for signaling contact | | 2 |
| Number of outputs for AS Interface maximum | | 1 |
| Display version as status display by LED | | yes |
| Number of switching contacts as NO contact for signaling function | | 1 |
| Design of the switching contact as NO contact for signaling function | | yes |
| Communication/ Protocol: |
| Protocol is supported AS-interface protocol | | Yes |
| Auxiliary circuit: |
| Operating current of auxiliary contacts | | |
| at AC-15 at 24 V | A | 3 |
| at DC-13 at 24 V | A | 1 |
| Inputs/ Outputs: |
| Type of voltage | | |
| of the input voltages | | DC |
| of the input voltage | | DC |
| Property of the output Short-circuit proof | | Yes |
| Output voltage | | |
| 1 at DC | | |
| — rated value | V | 30 |
| — rated value | V | 20.5 ... 31.6 |
| 2 at DC rated value | V | 24 |
| Output current at DC maximum | A | 4 |
| Input voltage | | |
| 1 at DC | | |
| — rated value | V | 30 |
| — rated value | V | 21 ... 32 |
| 2 at DC rated value | V | 24 |
| Input current at DC maximum | A | 4.1 |
| Short-circuit: |
| Design of short-circuit protection | | electronic |
| Installation/ mounting/ dimensions: |
| Mounting position | | vertical |
| Mounting type | | 35-mm DIN rail mounting or wall mounting with plug-in flaps |
| Width | mm | 22.5 |
| Height | mm | 101.3 |
| Depth | mm | 121.2 |
| Type of electrical connection for auxiliary and control current circuit | | screw-type terminals |
| Product function removable terminal for auxiliary and control circuit | | Yes |
| Type of connectable conductor cross-sections | | |
| for auxiliary contacts | | |
| — solid | | 1x (0.5 ... 4 mm²), 2x (0.5 ... 2.5 mm²) |
| — finely stranded | | |
| — with core end processing | | 1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.5 mm²) |
| at AWG conductors for auxiliary contacts | | 2x (20 ... 14) |
| Certificate of suitability | | CE / UL / CSA |
| Suitability for use safety-related circuits | | Yes |
