| AS-i load feeder module Phased-out product !!! For further information, please contact our sales department 2 inputs, 1 output, 24 V DC for busbar system 40 + 60 mm |
| General technical data: |
| Design of the product | | load feeder modules, IP20 |
| Type | | 2 inputs / 1 output |
| Design of the slave type | | standard slave |
| I/O configuration | | 3 |
| ID code | | F |
| Current consumption AS-Interface | mA | 8 ... 12 |
| Addressing | | the module retains the last address after the 15th addressing procedure |
| Type of electrical connection of the inputs and outputs | | spring-loaded terminals |
| Inputs: |
| Number of digital inputs | | 2 |
| Type of connection | | insulation displacement terminals |
| Type of voltage of the input voltages | | DC |
| Input voltage | V | 26.5 ... 31.6 |
| Input current at digital input for signal <1> minimum | mA | 6 |
| Inputs | | |
| polarity reversal protection | | built-in |
| cable length between IN and one of the inputs max | m | 0.4 |
| Design of the pin assignment of the inputs | | 2-conductor |
| Outputs: |
| Number of digital outputs | | 1 |
| Type of voltage of output voltages | | DC |
| Outputs aggregate current thermal Ith | A | 2 |
| Type of switching output | | PNP transistor |
| Property of the output Short-circuit proof | | Yes |
| Outputs | | |
| short-ciruit protection | | built-in |
| induction protection | | built-in |
| watchdog | | built-in |
| polarity reversal protection | | built-in |
| power supply external Ie | | DC 24 |
| current carrying capacity | | 0.5 A (DC-13 / DC-14) |
| Status display display of AS-Interface/diagnostics | | auxiliary voltage present AS-Interface communication OK AS-Interface communication faulty Station address = 0 (module not addressed) |
| Ambient conditions: |
| Ambient temperature | | |
| during operation | °C | 0 ... 55 |
| during storage | °C | -40 ... +85 |
| Protection class IP | | IP20 |
| Mechanical data: |
| Width | mm | 45 |
| Mounting type | | standard rail |
| Connections conductor cross-sections | | |
| connector for AS-Interface and auxiliary power | | 0.5 ... 0.75 mm² (flexible) |
| spring-loaded terminal connection for I/O wiring | | 0.8 ... 2.5 mm² (flexible withoutend sleeves) |
| power connector 5-pole | | 0.5 ... 2.5 mm² AWG 28 ... 12 |
| PE/neutral conductor wiring at the support | | 2.5 mm² flexible AWG 13 |
