| AS-Interface user module IP67 Phased-out product !!! For further information, please contact our sales department digital, 2 DI/2 DQ, NPN 2 x input, 200 mA 2 x output, 1 A 24 V DC 4 x M12 socket |
| General technical data: |
| Design of the product | | digital I/O modules for operation in the field, IP67 - user modules |
| Design of the slave type | | standard slave |
| Type | | 2 inputs / 2 outputs |
| I/O configuration | | 3 |
| ID code | | 1 |
| Number I/O sockets | | 4 |
| Protocol is supported AS-interface protocol | | Yes |
| Type of electrical connection of the inputs and outputs | | M12 screw-type terminals |
| AS interface total current input max | mA | 290 |
| operating voltage according to AS-Interface spezification | V | 26.5 ... 31.6 |
| Note 1 | | An external additional supply (AUX POWER) of 20 to 30 V DC is required for the supply of the output circuits. The additional supply must comply with VDE 0106 (PELV), protection class III. |
| Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | | A |
| Reference code acc. to DIN EN 61346-2 | | K |
| Inputs: |
| Number of digital inputs | | 2 |
| Input circuit | | NPN |
| Type of voltage of the input voltages | | DC |
| Input voltage | V | 20 ... 27 |
| Inputs switching level High min | V | 10 |
| Input current at digital input | | |
| for signal <1> minimum | mA | 5 |
| with signal <0> maximum | mA | 1.5 |
| Inputs sensor supply using AS-Interface | | short-circuit and overload resistant |
| Outputs: |
| Number of digital outputs | | 2 |
| Type of voltage of output voltages | | DC |
| Outputs external power supply 24 V DC | | 24 V DC using black flat cable |
| Output voltage at DC at 24 V | V | 22 ... 24 |
| Output current at digital output for signal <1> Rated value | A | 1 |
| Outputs aggregate current max | A | 2 |
| Type of switching output | | transistor |
| Property of the output Short-circuit proof | | Yes |
| Outputs | | |
| short-ciruit protection | | built-in |
| induction protection | | built-in |
| current carrying capacity DC-12/13 | | 1 A |
| Status display | | |
| display of I/Os | | yellow LED |
| display of AS-Interface/diagnostics | | LED 'AS-i' green = OK red = No data traffic flashes red/yellow = zero address flashes red = overload sensor |
| Assignment of data bits | | |
| socket | | PIN4 = IN1 (D0), PIN2 = IN2 (D1) |
| socket 2 | | PIN4 = IN2 (D1) |
| socket 3 | | PIN4 = OUT1 (D2), PIN2 = OUT2 (D3) |
| socket 4 | | PIN4 = OUT2 (D3) |
| Ambient conditions: |
| Ambient temperature | | |
| during storage | °C | -40 ... +85 |
| during operation | °C | -25 ... +85 |
| Protection class IP | | IP67 |
| Mechanical data: |
| Width | mm | 45 |
| Height | mm | 80 |
| Depth | mm | 27 |
| Mounting type | | standard rail mounting/wall mounting using coupling module |
| connection | | using contact pins on FK-E or Pg-E coupling module |
| Type of connection | | 2- and 3-wire technology |
