| DS1-X for ET 200S Standard DOL starter expandable Setting range 4.5...6.3 A AC-3, 2.2 kW / 400 V Electromechanical starter for brake control module |
| Product brand name | SIMATIC |
| Product designation | Motor starters |
| Design of the product | direct starter |
| Product type designation | ET 200S |
| General technical data |
| Product function | |
| on-site operation | Yes |
| Power loss [W] typical | 10 W |
| Insulation voltage | |
| rated value | 500 V |
| Degree of pollution | 3 at 400 V, 2 at 500 V according to IEC60664 (IEC61131) |
| Surge voltage resistance rated value | 6 kV |
| maximum permissible voltage for safe isolation | |
| between main and auxiliary circuit | 400 V |
| Protection class IP | IP20 |
| Shock resistance | 5g / 11 ms |
| Operating frequency maximum | 750 1/h |
| Mechanical service life (switching cycles) | |
| of the main contacts typical | 100 000 |
| Type of assignment | 1 |
| Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | A |
| Reference code acc. to DIN EN 81346-2 | Q |
| Reference code acc. to DIN EN 61346-2 | Q |
| Product function | |
| direct start | Yes |
| reverse starting | No |
| Product component Motor brake output | Yes |
| Product feature | |
| brake control with 230 V AC | No |
| brake control with 24 V DC | No |
| brake control with 180 V DC | No |
| brake control with 500 V DC | No |
| Product extension braking module for brake control | Yes |
| Product function Short circuit protection | Yes |
| Design of short-circuit protection | circuit-breakers |
| Trip class | CLASS 10 |
| Maximum short-circuit current breaking capacity (Icu) | |
| at 400 V rated value | 50 kA |
| Electromagnetic compatibility |
| EMC emitted interference | |
| acc. to IEC 60947-1 | CISPR11, ambience A (industrial sector) |
| EMI immunity acc. to IEC 60947-1 | corresponds to degree of severity 3, ambience A (industrial sector) |
| Conducted interference | |
| due to burst acc. to IEC 61000-4-4 | 2 kV on voltage supply, inputs and outputs |
| due to conductor-earth surge acc. to IEC 61000-4-5 | 2 kV (U > 24 V DC) |
| due to conductor-conductor surge acc. to IEC 61000-4-5 | 1 kV (U > 24 V DC) |
| Field-bound parasitic coupling acc. to IEC 61000-4-3 | 80 MHz ... 1 GHz 10 V/m, 1.4 GHz ...2 Hz 3 V/m, 2 GHz ... 2.7 GHz 1 V/m |
| Safety related data |
| B10 value | |
| with high demand rate acc. to SN 31920 | 1 000 000 |
| Proportion of dangerous failures | |
| with low demand rate acc. to SN 31920 | 50 % |
| with high demand rate acc. to SN 31920 | 75 % |
| Failure rate [FIT] | |
| with low demand rate acc. to SN 31920 | 100 FIT |
| T1 value for proof test interval or service life acc. to IEC 61508 | 20 y |
| Protection against electrical shock | finger-safe |
| Main circuit |
| Number of poles for main current circuit | 3 |
| Design of the switching contact | electromechanical |
| Adjustable pick-up value current of the current-dependent overload release | 4.5 ... 6.3 A |
| Type of the motor protection | bimetal |
| Operating voltage | |
| rated value | 200 ... 400 V |
| Operating frequency 1 rated value | 50 Hz |
| Operating frequency 2 rated value | 60 Hz |
| Relative positive tolerance of the operating frequency | 10 % |
| Relative negative tolerance of the operating frequency | 10 % |
| Operating range relative to the operating voltage at AC | |
| at 50 Hz | 200 ... 440 V |
| Operating power | |
| at AC-3 | |
| — at 400 V rated value | 2.2 kW |
| Inputs/ Outputs |
| Product function | |
| digital inputs parameterizable | No |
| digital outputs parameterizable | No |
| Number of digital inputs | 0 |
| Number of sockets | |
| for digital output signals | 0 |
| for digital input signals | 0 |
| Supply voltage |
| Type of voltage of the supply voltage | DC |
| Supply voltage 1 at DC | 24 ... 24 V |
| Supply voltage 1 at DC rated value | |
| minimum permissible | 20.4 V |
| maximum permissible | 28.8 V |
| Control circuit/ Control |
| Type of voltage of the control supply voltage | DC |
| Control supply voltage at DC | |
| rated value | 20.4 ... 28.8 V |
| Control supply voltage 1 | |
| at DC rated value | 20.4 ... 28.8 V |
| at DC | 24 ... 24 V |
| Power loss [W] in auxiliary and control circuit | |
| in switching state OFF | |
| — with bypass circuit | 0.3744 W |
| — without bypass circuit | 0.374 W |
| in switching state ON | |
| — with bypass circuit | 4.1184 W |
| — without bypass circuit | 4.118 W |
| Installation/ mounting/ dimensions |
| Mounting position | vertical, horizontal |
| Mounting type | pluggable on terminal module |
| Height | 265 mm |
| Width | 45 mm |
| Depth | 120 mm |
| Ambient conditions |
| Installation altitude at height above sea level | |
| maximum | 2 000 m |
| Ambient temperature | |
| during operation | 0 ... 60 °C |
| during storage | -40 ... +70 °C |
| during transport | -40 ... +70 °C |
| Relative humidity during operation | 5 ... 95 % |
| Communication/ Protocol |
| Protocol is supported | |
| PROFIBUS DP protocol | Yes |
| PROFINET protocol | Yes |
| Design of the interface | |
| PROFINET protocol | Yes |
| Product function Bus communication | Yes |
| Protocol is supported | |
| AS-interface protocol | No |
| Product function | |
| supports PROFIenergy measured values | No |
| supports PROFIenergy shutdown | No |
| address range memory of address range | |
| of the inputs | 1 byte |
| of the outputs | 1 byte |
| Type of electrical connection | |
| of the communication interface | via backplane bus |
| for communication transmission | via backplane bus |
| Connections/Terminals |
| Type of electrical connection | |
| for main current circuit | screw-type terminals |
| Type of electrical connection | |
| 1 for digital input signals | using control module |
| 2 for digital input signals | using control module |
| Type of electrical connection | |
| at the manufacturer-specific device interface | plug |
| for main energy infeed | screw-type terminals |
| for load-side outgoing feeder | Screw-type terminals |
| for main energy transmission | via energy bus |
| for supply voltage line-side | via backplane bus |
| for supply voltage transmission | via backplane bus |
| UL/CSA ratings |
| Operating voltage | |
| at AC at 60 Hz acc. to CSA and UL rated value | 600 V |
