HC806176001704 Pumps - TVWS-250-M-R-DP-0135-172 Ruderanlage SAM rechts
From Hydrokraft
Feature | Code | Description |
---|---|---|
SERIES | TV | VARIABLE PUMP |
TYPE | W | W TYPE |
CONFIGURATION | S | SINGLE UNIT |
SEPARATOR | - | SEPARATOR |
DISPLACEMENT | 250 | DISPL 250CC |
BASIC STANDARD | M | METRIC |
MOUNTING FLANGE | 07 | ISO 200 4 HOLE FLANGE 250,360CC |
ROTATION DIRECTION | R | RIGHT HAND ROTATION |
ADJUSTMENT STOPS | 0 | NO ADJUSTMENT STOPS |
THRU-DRIVE OPTIONS | 00TP | THROUGH DR. CHARGE & PILOT PUMP |
MAIN PORTS | 1 | A & B PORTS SAE, METRIC THREAD |
MAIN PORT ORIENTATION | R | A & B PORTS RADIAL |
MAIN DRIVE SHAFT END | 01 | KEYED SHAFT ISO |
DRIVE SHAFT SEAL CONFIGURATION | S | SINGLE SHAFT SEAL |
SEAL MATERIAL | N | BUNA N/VITON SHAFT SEAL |
YOKE POSITION INDICATOR | V | OPTICAL POSITION INDICATOR |
PAINT | A | PAINTED BLUE |
TRANSM. BLOCK CONFIGURATION | 2 | WITH TRANS. CIRCUIT, FILTER ELEC. IND. |
ZERO POSITION VALVE | 0 | NO ZERO POSITION VALVE |
CONTROL TYPE | DP | PR. SIGNAL PROPORTIONAL CONTROL |
CONTROL OPTIONS | K | WITH PROP. RELIEF & DIR. VALVE INC. ELECTRONICS |
CONTROL OPTIONS | 00 | WITHOUT ELECTRONICS |
CONTROL OPTIONS | C | OVER CENTER |
CONTROL OPTIONS | 0 | NO EXTRA FUNCTION |
CONTROL OPTIONS | 0 | STANDARD |
CONTROL OPTIONS | 000 | NO POWER CONTROL A |
CONTROL OPTIONS | 000 | NO POWER CONTROL B |
PILOT OIL FILTER | 0 | NO PILOT OIL FILTER |
CONTROL OPTIONS | 0 | NO FAIL SAFE VALVE |
POSITION MONITOR (ES ONLY) | 0 | NO POSITION MONITORING |
CONTROL OPTIONS | 0 | NO ELECTRIC MOTOR |
CONTROL OPTIONS | 0 | CONTROL VOLTAGE NOT APPLICABLE |
DESIGN NUMBER | 11 | DESIGN NUMBER |