70160-RUK-03 Pumps - 1.44 CID PUMP ASSY
From Eaton
Feature | Code | Description |
---|---|---|
CODE TITLE | ADB | EATON MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP |
DISPLACEMENT | 14 | 23.6 CM3/R [1.44 IN3/R] |
INPUT SHAFT ROTATION | R | RIGHT HAND ROTATION (CW) |
VALVE PLATE | 7 | VALVE PLATE- TYPE 7 |
INPUT SHAFT | F | STRAIGHT, 22.212 [.8745] DIAMETER, 6.35 [.250] W X 25.9 [1.02] L KEY(KEY INCLUDED); 41.3 [1.62] SHAFT EXTENSION |
CONTROL SHAFT LOCATION | R | RIGHT SIDE |
CONTROL SHAFT | C | WITH KEYWAY 4.78 X 16.3 [.188 X .64], ARM DIAMETER 19 [.748] (SQUARE KEY INCLUDED); 113 [4.45] FROM UNIT CENTERLINE TO CONTROL SHAFT END |
MAIN PORT LOCATION (A AND B) | 1 | OPPOSITE SIDES |
MAIN PORT SIZE (A AND B) | 1 | 1.0625-12 UN-2B SAE O-RING PORTS |
RELIEF VALVE SETTING FOR MAIN PORT A | N | 275.8 BAR [4000 LBF/IN2] |
RELIEF VALVE SETTING FOR MAIN PORT B | N | 275.8 BAR [4000 LBF/IN2] |
CHARGE DISP. & SUCTION PORT SIZE (S) | 1 | 6.9 CM3/R [.42 IN3/R]; (.750-16 UNF-2B SAE O-RING PORT FOR SUCTION INLET - RIGHT SIDE CCW, LEFT SIDE CW) |
CHARGE RELIEF SETTING & ROUTING | A | 6.89-10.34 BAR [100-150 LBF/IN2] RELIEVED TO CASE |
CHARGE SPECIAL FEATURE | 0 | NO SPECIAL CHARGE FEATURE |
AUXILIARY REAR MOUNT AND OUTPUT SHAFT | A | WITH INTEGRAL CHARGE - HORIZONTAL SAE J744 FLANGE 82-2 (2 BOLT A); 9 TOOTH INTERNAL 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXTENSION |
SPECIAL FEATURES AUXILIARY MOUNTING | 00 | NO SPECIAL FEATURES |
AUX PORT TOP-FRONT (C1) OR BYPASS VALVE | 3 | BYPASS VALVE INSTALLED |
AUX PORT TOP-REAR (C2) | 2 | .750-16 UNF-2B SAE O-RING PORT PLUGGED |
AUX PORT SIDE (C4 OR C5) (CHG PUMP ONLY) | 0 | NO AUXILIARY PORT |
CASE DRAIN (D1 AND D2) | A | .750-16 UNF-2B SAE O-RING PORT D1-TOP (D2-BOTTOM PLUGGED) |
THRU DRAIN FRONT (D4) | 0 | NO THRU DRAIN (D4)-FRONT |
ADDITIONAL FUNCTIONS | 0 | NO ADDITIONAL FUNCTIONS |
SPECIAL FEATURES | 00 | NONE |
PAINT | 0B | BLACK PER SPEC 209-13B |
IDENTIFICATION | 0 | EATON IDENTIFICATION LABEL |
DESIGN CODE | C | C |