70160-RSZ-03 Pumps - 1.44 MD MAN VAR DIS AX PISTON PUMP
From Eaton
| Feature | Code | Description |
|---|---|---|
| CODE TITLE | ADB | EATON MEDIUM DUTY MANUALLY VARIABLE DISPLACEMENT AXIAL PISTON PUMP |
| DISPLACEMENT | 14 | 23.6 CM3/R [1.44 IN3/R] |
| INPUT SHAFT ROTATION | R | RIGHT HAND ROTATION (CW) |
| VALVE PLATE | 1 | VALVE PLATE- TYPE 1 |
| INPUT SHAFT | A | 13 TOOTH EXTERNAL SPLINE, 16/32 PITCH, 21.806 [.8585] MAJOR DIAMETER; 41.2 [1.62] SHAFT EXTENSION |
| CONTROL SHAFT LOCATION | L | LEFT SIDE |
| CONTROL SHAFT | D | WITH 15.7 [.62] SQUARE ARM, AND RADIUS 4.83 [.190] LOCKING BOLT GROOVE; 113 [4.45] FROM UNIT CENTERLINE TO CONTROL SHAFT END |
| MAIN PORT LOCATION (A AND B) | 2 | SAME SIDE (BOTTOM) NOT AVAILABLE WITH INTERNAL CHARGE PUMP |
| MAIN PORT SIZE (A AND B) | 1 | 1.0625-12 UN-2B SAE O-RING PORTS |
| RELIEF VALVE SETTING FOR MAIN PORT A | L | 241.3 BAR [3500 LBF/IN2] |
| RELIEF VALVE SETTING FOR MAIN PORT B | L | 241.3 BAR [3500 LBF/IN2] |
| CHARGE DISP. & SUCTION PORT SIZE (S) | 0 | NO CHARGE PUMP |
| CHARGE RELIEF SETTING & ROUTING | B | 10.34-13.79 BAR [150-200 LBF/IN2] RELIEVED TO CASE |
| CHARGE SPECIAL FEATURE | 0 | NO SPECIAL CHARGE FEATURE |
| AUXILIARY REAR MOUNT AND OUTPUT SHAFT | B | NO INTEGRAL CHARGE- HORIZONTAL / VERTICAL SAE J744 FLANGE 82-2 (2 BOLT A) 11 TOOTH EXTERNAL 16/32 PITCH SPLINE WITH 31.7 [1.25] SHAFT EXTENSION (COUPLER REQUIRED) |
| SPECIAL FEATURES AUXILIARY MOUNTING | AK | SUPPLY SHAFT COUPLER 11 TOOTH 16/32 PITCH AND AUXILIARY MOUNTING HOLES, 2X .375-16 UNC-2B THREAD, 15 [.59] MIN FULL THREAD, BOTH SIDES |
| AUX PORT TOP-FRONT (C1) OR BYPASS VALVE | 3 | BYPASS VALVE INSTALLED |
| AUX PORT TOP-REAR (C2) | 1 | .750-16 UNF-2B SAE O-RING PORT |
| AUX PORT SIDE (C4 OR C5) (CHG PUMP ONLY) | 0 | NO AUXILIARY PORT |
| CASE DRAIN (D1 AND D2) | A | .750-16 UNF-2B SAE O-RING PORT D1-TOP (D2-BOTTOM PLUGGED) |
| THRU DRAIN FRONT (D4) | 0 | NO THRU DRAIN (D4)-FRONT |
| ADDITIONAL FUNCTIONS | 0 | NO ADDITIONAL FUNCTIONS |
| SPECIAL FEATURES | 00 | NONE |
| PAINT | 0B | BLACK PER SPEC 209-13B |
| IDENTIFICATION | 0 | EATON IDENTIFICATION LABEL |
| DESIGN CODE | C | C |
