| CODE TITLE | ADU | PRESSURE COMPENSATED/PRESSURE FLOW COMPENSATED OPEN CIRCUIT PISTON PUMP |
| DISPLACEMENT | 041 | 41,0 CM3/R [2.50 IN3/R] |
| INPUT SHAFT ROTATION | R | RIGHT-HAND ROTATION (CW) RIGHT SIDE SUCTION PORT, LEFT SIDE PRESSURE PORT |
| FRONT MOUNTING & INPUT SHAFT | 02 | 2 BOLT B (SAE J744-101-2) WITH 25,4 [1.00] DIA STRAIGHT KEY SHAFT (SAE J744-25-1) (KEY INCLUDED) |
| MAIN PORTS SIZE & LOCATION | AF | SIDE PORTS; SUCTION - 1.875-12 UN-2B SAE O-RING PORT; PRESSURE - 1.3125-12 UN-2B SAE O-RING PORT (49,2 [3.00] AND 41,0 [2.50] DISPLACEMENTS ONLY) |
| DRAIN PORT SIZE & LOCATION | 1 | 1.0625-12 UNF-2B O-RING PORT - TOP |
| DIAGNOSTIC PRESSURE PORTS | 0 | NO DIAGNOSTIC PRESSURE PORTS |
| CONTROLLER TYPE | AA | PRESSURE AND FLOW COMPENSATOR WITH .4375-20 SAE O-RING LOAD SENSE PORT LEFT SIDE |
| PRESSURE COMPENSATOR SETTING | 28 | 206,8-213,7 BAR [3000-3100 LBF/IN2] |
| FLOW COMPENSATOR SETTING | 10 | 9,65-12,41 BAR [140-180 LBF/IN2] |
| TORQUE CONTROL SETTING | 00 | NO TORQUE CONTROL OR SECONDARY COMPENSATOR |
| CONTROL SPECIAL FEATURE | 0A | BLEED DOWN ORIFICE |
| MAXIMUM DISPLACEMENT OPTION | 02 | EXTERNAL MANUAL STROKE ADJUSTMENT (SET AT MAXIMUM) |
| AUXILIARY (REAR) MOUNT & OUTPUT SHAFT | AA | DUAL SAE J744 FLANGE 82-2 (2 BOLT A); ACCEPTS 9T 16/32 SPLINE WITH 31,7 [1.25] SHAFT EXTENSION (NO COUPLER REQUIRED, AUX. MOUNT O-RING INCLUDED) |
| SHAFT SEAL | 2 | FLUOROCARBON RUBBER SHAFT SEAL |
| PUMP SPECIAL FEATURES | 00 | NO PUMP SPECIAL FEATURES |
| PAINT | CD | BLUE PRIMER PER SPEC 209-13CD |
| IDENTIFICATION / PACKAGING | 00 | MARK EATON PRODUCT NUMBER AND FULL MODEL CODE ON LABEL / INDIVIDUAL BOX PACKAGING |
| DESIGN CODE | C | THIRD DESIGN |
