119-1044-003 Motors - 10000 Series; Standard Mount Motor
From Char-Lynn
| Feature | Code | Description |
|---|---|---|
| PRODUCT | M | MOTOR |
| SERIES | 10 | 10,000 SERIES |
| DISPLACEMENT | 210 | 343.8 CM3/R [20.98 IN3/R] |
| MOUNTING TYPE | AA | STANDARD, 4 BOLT; 127.0 [5.00] PILOT DIA. 16.76 [.660] DIA. HOLES ON 161.92 [6.375] DIA. BOLT CIRCLE. |
| OUTPUT SHAFT | 03 | 53.98 [2.125] DIA. FLAT ROOT,MAJOR DIA. FIT,16 TOOTH, 8/16 DP, 30 DEGREE INVOLUTE SPLINE WITH .500-20 UNF-2B THREAD IN END. 52.07 [2.050] MINIMUM FULL SPLINE LENGTH |
| PORTS | AB | 31.75 [1.250] DIA. 4 BOLT SPLIT FLANGE, STAGGERED PORTS WITH .4375-14 UNC-2B TAPPED MOUNTING HOLES |
| CASE FLOW OPTIONS | 01 | .5625-18 UNF-2B CASE DRAIN SAE O-RING PORT |
| LOW PRESSURE RELIEF | 0 | NONE |
| PRESSURE / FLOW OPTION | 00 | NONE |
| GEROLER OPTION | 0 | STANDARD |
| SEAL OPTION | 0 | STANDARD |
| ACCESSORIES | 00 | NONE |
| SPECIAL FEATURE (HARDWARE) | 00 | NONE |
| SPECIAL FEATURE (ASSEMBLY) | 00 | NONE |
| PAINT / PACKAGING | 00 | NONE |
| CUSTOMER IDENTIFICATION | 00 | NONE |
| DESIGN CODE | C | THIRD |
